User manual BLAUPUNKT ALASKA RDM 168

[. . . ] ThummerTM III Steering Wheel Remote Control (sold separately) Commande B distance ThummerTM Ill (optionnelle) Funcionamiento del control remoto ThummerTM III (optional) Funcionamento do Controle Remoto ThummeP Ill (optional) 2 . . Table of contents Equipment overview . . . . . . . . . . . . . . . . . . . . . . 5 Scrolling through station chains (only FM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Automatic storage of strongest stations with Travelstore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Activating automatic IF bandwidth switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] CDs with a diameter of 8 cm or CDs in the shape of, for example, a butterfly or a beer mug are not suitable to be played in the unit. You should keep the door of the CD changer closed after inserting the magazine in order to prevent dirt from entering. CD mix operation CD titles can be played in a random sequence. The mix function is on when the display briefly shows "MIX CD" after implementing the change and at the beginning of each new title. CD pause If you press station key 3 while playing a CD, the CD program will stop. By pressing station key 3 again, the pause function is deactivated and the CD program will be continued where it stopped. CD SCAN operation To briefly scan the CD titles. To activate SCAN: Press the SC key for 2 seconds; the l display will show "CD-SCAN". l The title last played will be continued. Inserting CDs Load the magazine with one or several CDs (with the label facing up). The CDs are counted from the bottom up. . Removing CDs Open the door of the CD changer and press the eject button. 18 Playing CDs Select the CD changer with the SRC key. Press the SRC key repeatedly until~ the l display shows "CHANGER". The first CD recognized by the changer will be played. The display will indicate `T' (Track) and next to it the respective number of the song just selected. CD Repeat (RPT/repeat function) CD titles can be played repeatedly. You are able to: Repeat the presently playing title (REPEATT) or all titles of the CD you are currently playing (REPEAT-D). When the RPT function is activated, the display lights up with "RPT". After choosing the repeat function and after each title change, the display will briefly show "REPEAT-T" or "REPEAT-D". l To turn RPT off: Press 4/RPT. l CD MIX operation CD titles can be played in a random sequence. You are able to: Play all titles of a CD (MIX-CD) or all titles of all inserted CDS (MIX-ALL) in random sequence. When the MIX function is activated, the display will show "MIX". After switching to this function and after each title change, the display will briefly show "MIX-CD" or "MIX-ALL". l Choosing titles When you first begin to play the CD the display will indicate the information identifying the CD (e. g. , number, name, or playing time). Choose CD NV A V "P down MIX-CD on: Press 5/MIX. To turn off MIX: Press 5/MIX. CD SCAN operation To briefly scan the CD titles. To activate SCAN: Press the SC key for 2 seconds: the l display will show "CD-SCAN" The titles will be briefly scanned sequentially. l The title last scanned will be continued. >> << The display will show the number or name of the currently played CD. Fast forward, audible (CUE) Fast reverse, audible (REVIEW). CD PAUSE If you press station key 3 while playing a CD, the CD program will stop. By pressing station key 3 again, the pause function is deactivated and the CD program will be continued where it stopped. You can skip several songs by pressing the key several times. 19 Naming CDs Choosing the display mode When playing CDs, you may select the display mode: "DISC NO" - The number of the CD currently being played is displayed. "NAME" - The name entered (e. g. , Madonna) will be displayed (only the Alaska RDM 168). [. . . ] Avoid mounting locations where the receiver would be subject to high temperatures, such as from direct sunlight or hot air from the heater, or where it would subject to dust, dirt or excessive vibration. The illustration below shows a typical installation, however, you may need to adjust the installation, depending on the receiver. If you have questions or need additional installation hardware, consult your Blaupunkt dealer. Make sure the receiver is firmly anchored (preferably at both front and back) and does not vibrate. Installing the Receiver in Most Dashboards This car receiver and its mounting bracket are designed for installation in vehicles with a standard DIN installation compartment measuring 182 x 53 mm, a 165 mm installation depth and an instrument panel thickness of approximately 1 to 20 mm in. [. . . ]