User manual BLAUPUNKT ACD2900

[. . . ] To switch the Loudness on/off: Press AUD until "LOUD ON" or "LOUD OFF" is displayed. To alter a setting: Press AUD briefly until the abbreviation of the desired mode and the corresponding value appear in the display. Extra function: To adjust the seek tuning sensitivity separately for local and distant reception. Stereo/mono switching: Keep button depressed until "MONO OFF" or "MONO ON" appears in the display. [. . . ] 19 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS Traffic safety This car radio is supplied with inactive code protection. In order to switch the anti-theft coding system on, proceed as described in the following. If the code protection system is active while the power supply to the system is interrupted (e. Theft, disconnection of the car battery), the set will be electronically blocked. In such a case it can only be made operable again by entering the correct code number given in the car radio passport. ENGLISH DEUTSCH Important notes Anti-theft coding Note: Keep your car radio passport including the code number in a safe place in order to avoid "unauthorised access" to your car radio. If the power supply to the unit is interrupted while the code system is switched on, you need to know the right code number. The radio will function again as soon as you have entered the correct code. If you have lost your radio passport and forgotten the code number, your radio can only be made operable again by one of our authorised customer service workshops, which is subject to payment. Restart following an interruption of the power supply (code system is activated) · Turn on the radio. Enter the code number given in the car radio passport: Example: The code number is 2521. More and more radio stations have begun to broadcast RDS information alongside their programs. As soon as a program has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional program in Lower Saxony, Germany). You now know exactly which program you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: the radio has been switched on or one of the stored frequencies recalled, the radio is automatically searching for an alternative frequency. "SEARCH" will disappear from the display when the alternative frequency has been found or the complete frequency range has been run through. If the reception quality of the selected program becomes too bad, · tune into another station. DEUTSCH Radio operation with RDS (Radio Data System) If you leave the service area of the regional program tuned into, or if you would like to take advantage of the full RDS service, then switch to "REG OFF". Press the AF button for approximately 2 seconds until "REG OFF" appears. If REG ON is activated, "REG ON" will appear in the display briefly each time the radio is switched on. When holding the or the button pressed down, the frequency scan is speeded up. Selecting the station search sensitivity You can alter the sensitivity of the automatic station search. [. . . ] Press the FMT button until the desired memory bank lights up in the display (press repeatedly if necessary). You can automatically store the six most powerful stations of your current reception area sorted according to their signal strength. The radio will search for the receivable FM stations and store them on the memory bank T (Travelstore). When this process has been completed, the radio will tune into the strongest station. [. . . ]