User manual BLAUPUNKT 22DC279-62F SERVICE MANUAL

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to contact the dealer or an experienced Radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Owner's Record The model and warranty numbers are located on the top of the unit. Refer to these numbers whenever you call upon your Blaupunkt dealer regarding this product. Warranty Number _____________ Attach Sales Receipt Here 2 Table of Contents English FCC Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] "TEL MUTE" appears. ) Mute or cellular mute is terminated by pressing any button. (Cellular mute is also ended by ending cellular telephone use. ) If volume level lower than mute level, lower volume level is maintained, even though "MUTE" appears. Automatic Source Tone Memory Bass and treble adjustments made are source specific, allowing different settings for each source (FM, AM, Cassette, Auxiliary and/or Changer), as is loudness. Bass, Treble, Balance and Fade Press Mute/AUDIO for more than 1/2 second to access Bass. Bass -Adjust from +7 to -7 at 2 dB/step using >> or /\ to increase bass, << or V to decrease. Treble - Adjust from +7 to -7 at 2 dB/step using >> or /\ to increase treble, << or V to decrease. Balance/Fade ("BAL/FADE") Adjust balance from L9 (all the way left) using << to R9 (all the way right) using >>. Adjust fader from F9 (sound only from the front) using /\ to R9 (sound only from the rear) using V. To cancel, press LD again. Radio Operation Once tuning is complete, radio display sequence follows. Last Station Memory Each FM bank and AM band has its own last station memory which holds last-tuned frequency for that band or bank irrespective of whether that frequency is stored into a preset. When in FM radio mode, press of FM advances to next FM band, FM1, FM2, or FM3/FMT. The following indicates what happens with insert and eject under various conditions: Activity Ignition off Ignition On/ Unit Off Turns Unit On OK Ignition On/ Power On/ Non-Tape Source Tape becomes active source OK Insert Eject No Reaction OK Cassette Direction/Program Selection "TAPE 1" indicates top side of tape is in play; "TAPE 2", bottom side. Cassette Fast Wind Press << to activate fast rewind ("FAST REW") or >> to activate fast forward, ("FAST FWD"). Super-Cassette Program Search Press /\ or V once for each track you wish to advance or go back. If V is pressed more times than current track value, tape will fast-rewind and begin play at first track. If /\ is pressed more times than there are tracks, tape will advance to end of tape, autoreverse and begin play. Radio Monitor Radio can be heard during tape winding modes (FF, FR, Tape Scan, Track Repeat, Cassette Program Search and Blank Skip). 16 Tape Track Repeat To play currently-selected track repeatedly, press RPT. While automatically rewinding to beginning of track, "FAST REW" appears. If radio monitor feature is activated, the radio monitor is heard while advancing to next track, and preset frequencies for most recently heard band are available. Unit continuously scans until SCA, SRC, FM, AM , EJECT, or MENU is pressed. 17 Pinch Roller Release During tape pause, or during change to another source, or during power off, unit's pinch feature automatically activates, protecting tape and tape head. [. . . ] Radio Station Naming ("STN NAME") Available only while radio is active source. (Names can be assigned to any frequency, preset or not. ) If you try to enter more than 30 names, "**FULL**" appears. Enter Station Name Access mode by pressing << or >> button. To return to Menu, press Mute again. (There is no time-out from Station Name Access & Edit modes. ) Display Priority & Radio Station Names- See Display Options on page 13. 21 Changing a Radio Station Name Repeat steps 1 to 10 in Radio Station Naming, changing only those characters that you wish to change. [. . . ]