User manual BLACKBERRY HEADSETS & AUDIO

[. . . ] · Verify that your BlackBerry device is running BlackBerry® Device Software version 4. 2. 2 or later. · Verify that your stereo has a 3. 5 mm auxiliary input jack or RCA auxiliary input jacks. 7 Pair with your BlackBerry device 1. Connect the smaller end of the BlackBerry® Travel Charger to the USB port on the side of the BlackBerry® Remote Stereo Gateway. Depending on the type of BlackBerry Travel Charger that you have, insert the plug blade attachment into the power adapter or fold the plug blades down. [. . . ] If you need to move the BlackBerry Remote Stereo Gateway while it is turned on, avoid touching the Power button. I connected the BlackBerry Remote Stereo Gateway to my stereo but there is no sound Try performing the following actions: · Verify that the BlackBerry® Remote Stereo Gateway is paired with and connected to your BlackBerry device. · Verify that the audio cable is securely connected to the BlackBerry Remote Stereo Gateway and your stereo. 16 · Verify that the volume of your stereo and your BlackBerry device is set to a comfortable listening level. · Verify that your BlackBerry device is playing a song or other audio file. · Verify that your stereo is set to detect auxiliary input. The BlackBerry Remote Stereo Gateway is not responding Unplug the BlackBerry® Travel Charger from the power outlet and then plug it back in again. If the BlackBerry® Remote Stereo Gateway is still not responding, return the BlackBerry Remote Stereo Gateway to the place of purchase for service. 17 18 Safety information Please read these safety instructions and the operation instructions provided in this booklet before using the BlackBerry® Remote Stereo Gateway. Audio Safety If you listen to audio files at loud levels, permanent hearing loss might occur. If you experience ringing in your ears or muffled speech, consult a physician to have your hearing checked. CAUTION: Do not plug a headset into the BlackBerry® Remote Stereo Gateway. Electrical Safety The BlackBerry Remote Stereo Gateway should be used only with the type of power source indicated in the operation instructions. Route all cables so that they are not likely to be walked on, tripped over or pinched by items placed upon or against them. Pay particular attention to the point where the power cable plugs in to the BlackBerry Remote Stereo Gateway. Do not overload power outlets, extension cords, or integral 19 convenience receptacles as this can result in a risk of fire or electric shock. To reduce the risk of damage to the cord or the plug, pull by the plug rather than the cord when you disconnect the BlackBerry Remote Stereo Gateway from the power source. Never push objects of any kind through openings in the BlackBerry Remote Stereo Gateway as they might short-out parts and could result in a fire or electric shock. Never spill liquid of any kind on the BlackBerry Remote Stereo Gateway. Do not use the BlackBerry Remote Stereo Gateway near water (for example near a bathtub, or a sink, in a wet basement, near a swimming pool, etc. ). Whether in use or not, the BlackBerry Remote Stereo Gateway should be situated away from heat sources, such as radiators, heat registers, stoves, flames, lit candles, cigarettes, or other products (including amplifiers) that produce heat. Care Unplug the BlackBerry Remote Stereo Gateway from the power outlet and your stereo before cleaning. Unplug the BlackBerry Remote Stereo Gateway from the power outlet and your stereo during lightning storms or when unused for long periods of time. 20 CAUTION: To reduce the risk of fire or electric shock, do not expose the BlackBerry Remote Stereo Gateway or the BlackBerry® Travel Charger to water, rain, or other moisture. Service Unplug the BlackBerry Travel Charger from the power outlet and from the BlackBerry Remote Stereo Gateway. [. . . ] RIM does not control, and is not responsible for, any Third-Party Information, including, without limitation the content, accuracy, copyright compliance, compatibility, performance, trustworthiness, legality, decency, links, or any other aspect of Third-Party Information. The inclusion of Third-Party 26 Information in this document does not imply endorsement by RIM of the Third-Party Information or the third party in any way. Installation and use of Third-Party Information with RIM's products and services may require one or more patent, trademark, or copyright licenses in order to avoid infringement of the intellectual property rights of others. Any dealings with Third-Party Information, including, without limitation, compliance with applicable licenses and terms and conditions, are solely between you and the third party. [. . . ]