User manual BLACK & DECKER EGBL108-FR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BLACK & DECKER EGBL108-FR. We hope that this BLACK & DECKER EGBL108-FR user guide will be useful to you.


BLACK & DECKER EGBL108-FR : Download the complete user guide (2281 Ko)

Manual abstract: user guide BLACK & DECKER EGBL108-FR

Detailed instructions for use are in the User's Guide.

[. . . ] EGBL108 A B C D E 2 (Original instructions) Intended use Your Black & Decker drill/screwdriver has been designed for screwdriving applications and for drilling in wood, metal and plastics. ENGLISH Safety instructions General power tool safety warnings @ Warning!Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. [. . . ] U Labels on tool The following symbols are shown on the tool: If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard. Additional safety instructions for batteries and chargers Batteries u Never attempt to open for any reason. U Do not store in locations where the temperature may exceed 30 °C. U Charge only at ambient temperatures between 4 °C and 40 °C. U When disposing of batteries, follow the instructions given in the section "Protecting the environment". To reduce the risk of injury, the user must read the instruction manual. Slide the battery into the receptacle and push until the battery snaps into place. U To remove the battery, push the release button (9) while at the same time pulling the battery out of the receptacle. 5 ENGLISH (Original instructions) Charger diagnostics If the charger detects a weak or damaged battery, the charging indicator (8) will flash red at a fast rate. U If the charging indicators continues flashing red at a fast rate, use a different battery to determine if the charging process works properly. U If the replaced battery charges correctly, the original battery is defective and should be returned to a service centre for recycling. U If the new battery gives the same indication as the original battery, take the charger to be tested at an authorised service centre. Note: It may take as long as 60 minutes to determine that the battery is defective. If the battery is too hot or too cold, the LED will alternately blink red, fast and slow, one flash at each speed and repeat. D) This tool is fitted with a keyless chuck to allow for an easy exchange of bits. U Grasp the rear half of the chuck (3) with one hand and use your other hand to rotate the front half in the counterclockwise direction, as viewed from the chuck end. U Firmly tighten the chuck by holding the rear half of the chuck and rotating the front portion in the clockwise direction as viewed from the chuck end. A) The battery needs to be charged before first use and whenever it fails to produce sufficient power on jobs that were easily done before. The battery may become warm while charging; this is normal and does not indicate a problem. If you do not yet know the appropriate setting, proceed as follows: - Set the torque adjustment collar (4) to the lowest torque setting. - If the clutch ratchets before the desired result is achieved, increase the collar setting and continue tightening the screw. B 6 (Original instructions) Drilling/screwdriving u ENGLISH Select forward or reverse rotation using the forward/ reverse slider (2). [. . . ] Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www. Uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www. Un alimentatore idoneo a un determinato battery pack potrebbe essere causa di incendio se usato con un battery pack diverso. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLACK & DECKER EGBL108-FR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLACK & DECKER EGBL108-FR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.