User manual BIZFON 3.1 UPGRADE CARD INSTALL GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BIZFON 3.1 UPGRADE CARD INSTALL GUIDE. We hope that this BIZFON 3.1 UPGRADE CARD INSTALL GUIDE user guide will be useful to you.


BIZFON 3.1 UPGRADE CARD INSTALL GUIDE : Download the complete user guide (187 Ko)

Manual abstract: user guide BIZFON 3.1 UPGRADE CARD INSTALL GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] PN: 050-00030:G Upgrading a Bizfon 680 Upgrading a Bizfon 680 In order to be able to use the new multi-tenant card, you must upgrade your Bizfon 680 to the version 3. 1 firmware. The Bizfon 680 you are upgrading must have version 1. 13 or higher firmware before you can upgrade to version 3. 1 Upgrading your Bizfon 680 Control Units takes approximately twenty minutes per unit. [. . . ] Hold the Upgrade card with the label facing you and insert the Upgrade card into the Voice Vault slot on the Bizfon 680 as shown below. Make sure that the card is fully inserted, as shown in the picture on the right. 4. The upgrade begins automatically and takes approximately twenty minutes to complete. Put the cover back on the Bizfon 680 by carefully sliding it into the slots on the case. If you have more than one Bizfon 680, repeat the upgrade procedure for each unit. Bizfon recommends the use of a switched power supply or an uninterruptible power supply. The Bizfon 680 restarts automatically, plays signal tones, and announces the time and date when it is ready. It takes about a minute for the Bizfon 680 to restart after it is plugged in. Place the upgrade card in the postage paid mailer, seal the mailer, and drop it in the mail. For Assistance or Questions Call Installation Support: 877-603-4100 3 Upgrading a Bizfon 680 If You Have BizTouch 3 Feature Telephones If you have BizTouch 3 telephones, follow these steps to upgrade their firmware. Unplug each phone's line cord from the modular jack on the back of the BizTouch 3. The BizTouch 3's LCD display shows the status of the upgrade process. The upgrade takes approximately ten minutes per phone and you cannot use the phone during the upgrade process. Installing the Multi-Tenant Card If you have purchased the multi-tenant option, you received a multi-tenant card. [. . . ] If you have a Bizfon Cluster, plug in the power cords of all the Bizfon 680s at the same time. Bizfon recommends the use of a switched power supply or an uninterruptible power supply. For Assistance or Questions Call Installation Support: 877-603-4100 4 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BIZFON 3.1 UPGRADE CARD INSTALL GUIDE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BIZFON 3.1 UPGRADE CARD INSTALL GUIDE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.