User manual BISSELL QUICKWASH 1970

[. . . ] If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket. IMPORTANT 3 ug603-5601_1970E_1005. indd 3 10/25/05 2:15:12 PM Product View Spray Trigger Quick Release Cord WrapTM Strain Reliever Handle Handle Assembly Power Cord Clean Water/ Solution Tank Lower Cord Wrap Upper Body Lower Body Vent Cover Containing Foam Filter Large Easy Rolling Wheels Power Switch Detent Lever Collection Tank Collection Tank Latch Removable Nozzle Spray Bar 4 ug603-5601_1970E_1005. indd 4 10/25/05 2:15:12 PM How To Use This Guide This User's Guide has been designed to help you get the utmost satisfaction from your BISSELL QuickWash Lightweight Deep Cleaner. You'll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User's Guide thoroughly before assembling your cleaner. [. . . ] Fill the rest of the tank with hand hot (not boiling) tap water to the water fill line. Replace and tighten the black cap. Tip: Always vacuum thoroughly before you deep clean. If possible, move large furniture to an area you will not be cleaning. 2. 4. Rotate Quick Release Cord WrapTM to release the Power Cord and plug into an outlet. Tip: Deep cleaning spots, spills and high traffic areas on a regular basis can prolong carpet life. 6 ug603-5601_1970E_1005. indd 6 10/25/05 2:15:13 PM Deep Cleaning 1. With your foot, press the red Power Switch [located in foot Tip: It is recommended that every time your Clean Water/Solution Tank is emptied of solution that you empty the contents of the Collection Tank. If the Collection Tank gets too full, you may begin to see foam spitting out of the vent cover. When this happens you will know it is time to empty the Collection Tank. of unit] ON. 2. Depress Spray Trigger to spray cleaning solution. Do not overwet. 4. To suction up water, repeat motion over same area without depressing the Spray Trigger. 5. Continue to clean entire carpet, working in 3' x 4' sections. Empty the Collection Tank when dirty water reaches the full line, or when the Clean Water/Solution Tank is empty. If Floor Nozzle stops spraying, turn Power Switch OFF and Cleaning Solution Section Keep plenty of genuine BISSELL Cleaning Formulas for Deep Cleaning Machines on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL Cleaning Formulas for Deep Cleaning Machines. NON-BISSELL Cleaning formulas may harm the machine and void the warranty. WARNING: To reduce the risk of fire and electric shock due to internal damage, use only BISSELL Cleaning Formulas intended for use with Deep Cleaning Machines. 1. 42 L BISSELL Fibre Cleansing FormulaTM with ScotchgardTM Protector Item # 710E 1. 42 L BISSELL Multi-Allergen RemovalTM Formula with ScotchgardTM Protector Item # 720E 1. 42 L BISSELL Pet Odor and Soil RemovalTM Formula with ScotchgardTM Protector Item # 730E 1. 42 L BISSELL Natural Orange Extract FormulaTM with ScotchgardTM Protector Item # 740E 1. 42 L BISSELL Lavender Essence Fibre Cleansing FormulaTM with ScotchgardTM Protector Item # 750E 7 ug603-5601_1970E_1005. indd 7 10/25/05 2:15:14 PM Bare Floor Cleaning 1. Attach Bare Floor Tool to unit. QuickWash (1970 series)-- remove Brush before attaching Bare Floor Tool. Fill the rest of the Tank with hand hot (NOT BOILING) tap water to the water fill line. Place Clean Water/Solution Tank on Lower Body. a. WARNING: To reduce the risk of injury from moving parts and/or electrical shock, turn Power Switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. lift by handle a. Press Spray Trigger and slowly move the machine forward and back over soiled surface one time. Repeat the motion without pressing Spray Trigger using the Bare Floor Tool to squeegee and suction up the dirty water. 7. Allow about 30 minutes for the floor to dry completely. Routine Maintenance When You're Done 1. [. . . ] Damage or malfunction caused by negligence, abuse, or use not in accordance with the User's Guide is not covered. For UK inquiries: Monday - Thursday 9 am -- 5 pm Friday 9 am -- 4 pm BISSELL Homecare (Overseas) Inc. The Boat Yard 105 Straight Road Old Windsor Berkshire, SL4 2SE United Kingdom Telephone: 0870-225-0109 For Australian inquiries: 24 hours a day 7, days a week E. D. Oates Pty Ltd 76 - 82 Newlands Road Reservoir VIC 3073 Australia Telephone: 1-800-811-183 For all other inquiries: Monday - Friday 8 am -- 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids, MI 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383 BISSELL HOMECARE INC. [. . . ]