User manual BISSELL FLIP-IT

[. . . ] It provides proof of date of purchase in the event of a warranty claim. See "About Your Warranty" on page 12 for details. 3 ug603_6719_5200E_305. indd 3 1/16/08 2:07:38 PM IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your Flip-ItTM Always connect to a properly Earthed Outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting. To reduce the risk of fire, electric shock or injury: Use indoors only . [. . . ] Apply Formula by depressing the Spray Trigger on the forward stroke only and release the Spray Trigger on the rearward stroke. Over wetting the floor surface may cause delamination of certain laminated flooring materials. CAUTION: 5 ug603_6719_5200E_305. indd 5 1/16/08 2:07:38 PM Specialized Cleaning Features Included with the purchase of your Flip-It are the following Specialized Cleaning Accessories. . . The Flip-It was designed to give the user the ability to easily change between the Gentle CleanTM Brushes and Pads. TM 1. The Gentle Clean Brush is recommended for WARNING: Do not plug in your cleaner until you have completely assembled it per the following instructions and operating procedures. use on Hard Floor surfaces such as tile, vinyl, slate or surfaces that have grout or crevices where dirt and grime collect. WARNING: To reduce the risk of fire, 2. The Gentle CleanTM Pad is intended for use on more delicate surfaces such as sealed hardwood, laminates or vinyl. use only BISSELL Hard and Wood Floor Cleaning Solutions in your Flip-It. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent based soil removers should not be used. These products may react with the plastic materials used in your Flip-It causing cracking or pitting. 3. The Pleated Filter, located in the lid of the Dirty Tank should be cleaned periodically. 1. Putting It Together Assembling your new BISSELL Flip-It is a simple 2 Step Process: NOTE: Remove Clean Tank from unit first. Make sure the screw opening in the Handle is aligned with the hole in the housing of the unit. 2. Insert screw; gently screw in until tight with the 2. body of the unit. 6 ug603_6719_5200E_305. indd 6 1/16/08 2:07:38 PM How To Use Your Flip-It Hard Floor Cleaner Getting Ready 1. Remove the Clean Tank from the machine. Tip: When using a Dry Gentle CleanTM Pad, you may want to get it slightly damp by squeezing the trigger to saturate the pad. This will aid in the flow of water and Formula to clean sticky grime and spots. 2. Unscrew the black Cap on the bottom of the Clean Tank and remove the Insert. 3. Filling the Clean Tank: Fill with BISSELL Formula to the Formula fill line and fill with water to the Water line. Place the full Tank back into the unit. Tip: Inserting The Gentle CleanTM Brush or Pad The first time you use your unit, the Gentle CleanTM Pad will be in the unit. Based on your flooring type and personal preference, you may want to change to the Gentle CleanTM Brush. Cleaning Formula Section Keep plenty of genuine BISSELL Hard and Wood Floor Cleaning Solutions on hand so you can clean when it fits your schedule. Always use genuine BISSELL cleaning formulas. When plugging the unit in, make sure to hook the power cord into the Cord Clip. This will help guide the power cord when you flip from Dry to Wet Cleaning. Tip: Use only specially formulated BISSELL Hard and Wood Floor Cleaning Solutions. Non-BISSELL cleaning formulas may harm the machine and void the warranty. WARNING: Fire and Electric Shock To Reduce the Risk of due to internal componet damage, use only BISSELL cleaning formula intended for use with the hard floor cleaner. 32 oz. 0484 7 ug603_6719_5200E_305. indd 7 1/16/08 2:07:39 PM Dry Vacuuming With the Dry Vacuum Side of the unit facing forward, turn the unit on and begin cleaning. You will see dry dirt, crumbs and debris being collected in the Dirty Tank. [. . . ] Damage or malfunction caused by negligence, abuse, or use not in accordance with the User's Guide is not covered. For UK inquiries: Monday - Thursday 9 am -- 5 pm Friday 9 am -- 4 pm BISSELL Homecare (Overseas) Inc. The Boat Yard 105 Straight Road Old Windsor Berkshire, SL4 2SE United Kingdom Telephone: 0870-225-0109 For Australian inquiries: 24 hours a day, 7 days a week E. D. Oates Pty Ltd 76 - 82 Newlands Road Reservoir VIC 3073 Australia Telephone: 1-800-811-183 For all other inquiries: Monday - Friday 8 am -- 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids Michigan 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383 BISSELL HOMECARE, INC. [. . . ]