User manual BISSELL FEATHERWEIGHT

[. . . ] Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc. ) or use in the presence of explosive liquids or vapour. Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours. Not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. by the manufacturer or its service agent in order to avoid a hazard. [. . . ] As a Multi-Purpose Vacuum: The crevice tool and floor nozzle may be used with either the hand vacuum or the floor vacuum. To use for cleaning in tight spaces, insert the crevice tool into the opening at the bottom of the dirt container. To clean a wider surface, remove the crevice tool and attach the floor nozzle by inserting it into the opening at the bottom of the dirt container. Press firmly to secure in place. 1 2. 2 3. 3 Power cord 1. Unplug power cord by grasping the plug, NOT the cord, and disconnect from outlet. Secure plug to power cord. Maintenance and care To maintain maximum performance from your BISSELL FeatherWeight vacuum, perform these simple maintenance checks: WA R N I Ncleaner G: To avoid injury, turn OFF and unplug Cord from wall when not in use. 1 Emptying the dirt container 1. To remove dirt from the dirt container and filter, hold the vacuum vertically as shown. Depress and hold latch on top of the vacuum to release the dirt container. Gently pull dirt container away from the hand vacuum grip and empty into waste container. The dirt container may be rinsed with warm water and a mild detergent if needed. Attach dirt container to vacuum by depressing latch and securely fitting onto hand vacuum grip. 3. 2 4. www. bissell. com 5 9/25/07 2:28:08 PM ug603-5513_3106J_907. indd 5 Maintenance and care Cleaning the filter The key to maximum performance is a clean filter. Cleaning the filter after each use will help your FeatherWeight vacuum operate at peak efficiency. Use only BISSELL replacement filters (#32019) in your BISSELL FeatherWeight. 3. CAUTION: Never operate your FeatherWeight vacuum without the filter in place. Doing so may damage the motor and void the warranty. Remove filter from the filter frame and shake over a waste container. To replace the filter back onto the filter frame, line up the curved tabs of the filter frame with the curved notches on the filter, and push together to secure. The filter should be fully pressed against the unit to prevent dust from escaping. Attach dirt container to vacuum by depressing latch and securely fitting onto hand vacuum grip. Make sure dirt container is correctly secured. After heavy usage, you may clean the filter by washing it gently by hand in warm water and mild dish detergent. [. . . ] Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. Please do not return this product to the store. Replacement parts - BISSELL FeatherWeight Below is a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item 1 2 3 4 5 Part No. 32019 203-2202 203-2203 203-5517 203-2250 Part Name Filter Crevice Tool Floor Nozzle Dirt Container Handle 1 2 3 4 5 www. bissell. com 7 9/25/07 2:28:09 PM ug603-5513_3106J_907. indd 7 Warranty - FeatherWeight This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. [. . . ]