User manual BISSELL 47R5 CLEANVIEW DELUXE 47R5

[. . . ] Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce air flow. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. gasoline, kerosene, etc. ) or use in the presence of explosive liquids or vapors. Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, etc. ). [. . . ] Press dirt container release latch down to disconnect dirt container and filter assembly from the unit. Remove filter by grasping tabs on both sides of filter frame and pulling away from the dirt container. For best results, periodically tap filter assembly against trash can to remove dirt that has collected on the screen and filter. Replace filter assembly by aligning side labeled "TOP" into top of dirt container. Grasp filter tabs and press firmly to ensure filter assembly is secure in dirt container. notE: Make sure side of filter assembly labeled "toP" faces outward when inserting filter assembly into dirt container. attEntIon: for best performance, dirt container and filter assembly should be cleaned after every use. 4. 6. 7. 7. Reattach dirt container to unit by aligning bottom of dirt container to bottom of unit. Use one hand to hold the unit and use the other hand to clip the dirt container securely in place. www. bissell. com 800. 237. 7691 5 Maintenance and care cleaning the filter and screen 1. Press dirt container release latch down to disconnect dirt container and filter assembly from the unit. Remove filter by grasping tabs on both sides of filter frame and pulling away from the dirt container. Separate filter assembly by grasping tabs on both sides of assembly and pull. For best results, periodically tap filter and screen against trash can to remove dirt that has collected on the screen and filter. Reconnect filter and screen by aligning rectangular tab on filter with insert on screen. See page 5 to reattach dirt container. notE: Dirt container and screen may be rinsed with cold water. 7. Storage/cord wrap system a wrap is always attached to the cord for quick and easy storage. Insert Tab nozzle and tools Maintenance Keep nozzle and tools clean and free of debris by wiping nozzle and tools clean with damp cloth. WaRnInG:electric to reduce the risk of shock, turn power off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting. Remedies 1. Check/replace fuse or reset breaker Troubleshooting Hand vacuum won't turn on Possible causes 1. Power cord not plugged in Blown fuse/tripped breaker in home Hand Vacuum won't pick up or low suction Possible causes 1. Dirt container not installed properly Dirt container is full Filter or screen is dirty Nozzle or hose is clogged with debris Remedies 1. Check assembly of dirt container making sure it is securely in place 2. [. . . ] or call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a. m. PO Box 3606 Grand Rapids, MI 49501 ATTN: Consumer Services BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL'S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. [. . . ]