User manual BISSELL 3750

[. . . ] I Do not put any object into appliance openings, use with blocked opening, or restrict air flow. I Do not expose hair, loose clothing, fingers or body parts to openings or moving parts. I Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc. ) or use in the presence of explosive liquids or vapour. I Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours. I I I I I I I I I I I WARNING: Not intended for use by young children or infirm persons without supervision. [. . . ] Stair Cleaning Tool: Use for stairs, area rugs, and other small carpeted areas. Telescoping Extension Wand: Use with desired attachment for a longer reach. To extend the Wand, twist the collar to "Unlock" position and push away from you. More tools are available; to order please refer to page 15. CAUTION: cleaner on Always place vacuum floor in its fully Upright Position and make sure it is locked into place before removing Cylinder or when using tools. Placing the Lift-Off in its full Upright Position automatically stops the rotating brush. 7 ug603-5539_3750E_304 6/25/04 2:08 PM Page 8 Cleaning With The Detachable Cylinder The Detachable Cylinder feature makes it possible to easily take the powerful cleaning action of your BISSELL Lift-Off to stairways, auto interiors, and other hard-to-reach areas of your home. Before detaching the Cylinder, your Lift-Off must be in its fully Upright Position. Press the Release Button at the top of the Cylinder Handle and lift the Cylinder to remove. Release Button 1. 2. 5. Detach the Vacuum Hose from the Hose Grip Base at the back of the Cylinder. Attach the desired tool(s) to the Hose Grip at the end of the Vacuum Hose. When you're done, remove the tool(s) and reconnect the Hose to the Hose Grip Base. Return the Cylinder to the Powerfoot by aligning the "feet" on the front with the bumps on the foot of the Upright Vacuum. Push the Cylinder toward the vacuum frame until it "clicks" into place. NOTICE: certain While vacuuming, Power Cord Storage When you are done using your BISSELL Lift-Off, return it to the Upright position and store the Power Cord. Turn vacuum cleaner off (O). carpets and low humidity conditions may generate small static discharges. The discharges are entirely harmless and are not associated in any way with the main power supply. 1. 3. Unplug Power Cord by grasping the plug (NOT the cord) and disconnect from outlet. Loop Power Cord around Cord Wraps on side of the Cylinder. Transporting Cleaner 1. 2. To move your vacuum cleaner from room to room, put the Handle in the Upright Position, tilt the cleaner back on its rear wheels and push forward. The cleaner can also be moved by using the Carrying Handle on the Detachable Cylinder. CAUTION: Button Do not press the Release while using the Carrying Handle to transport the vacuum cleaner. The foam Upper Tank Filter may be removed and hand washed in cold water with mild detergent. NOTE: For easier access, the entire Upper Tank may be removed by turning the knob on the back of the cleaner to unlock and pulling the entire tank straight out. 3. 4. Upper Tank Knob Cleaning The Pre-Motor and Post-Motor Filters Use only BISSELL Replacement Filters in your BISSELL Lift-Off. Pre-Motor Filter 203-1073 HEPA Media Post-Motor Filter #3091 Unplug the cleaner from electrical outlet. 1. 2. The Pre-Motor Filter protects the motor from dirt particles. [. . . ] This warranty does not apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with the User's Guide is not covered. For UK inquiries: Monday - Thursday Friday 9 am -- 5 pm 9 am -- 4 pm BISSELL Homecare (Overseas) Inc. The Boat Yard 105 Straight Road Old Windsor Berkshire, SL4 2SE United Kingdom Telephone: 0870-225-0109 For all other inquiries: Monday - Friday BISSELL Homecare, Inc. [. . . ]