User manual BIOSTAR TPOWER I45 BIOS MANUAL

[. . . ] TPower I45 BIOS M anual BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Advanced Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 PCIPnP Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4 Boot Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 5 Chipset Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 6 O. N. E Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 7 Exit Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 i TPower I45 BIOS M anual BIOS Setup Introduction T he purpose of this manual is to describe the settings in the AMI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. T he power of CMOS RAM is supplied by a battery so that it retains the Setup information when the power is turned off. Basic Input-Output System (BIOS) determines what a computer can do without accessing programs from a disk. [. . . ] AUTO option disables legacy support if no USB devices are connected. > USB Mass Sto rage Device Configu ration +F1 F10 ESC vxx . xx (C)Copyright 1985-200x, American Me gatrends, Inc. 16 TPower I45 BIOS M anual Legacy USB Support T his item determines if the BIOS should provide legacy support fo r USB devices like the keyboard, mouse, and USB drive. T his is a useful feature when using such USB devices with operating systems that do not natively support USB (e. g. Options: Enabled (Default) / Disabled USB 2. 0 Controller Mode T his item allows you to select the operation mode of the USB 2. 0 controller. Options: HiSpeed (Default) USB 2. 0-480Mbps FullSpeed USB 1. 1-12Mbps BIOS EHCI Hand-Off T his item allows you to enable support for op erating systems without an EHCI hand-o ff feature. Options: Enabled (Default) / Disabled USB Mass Storage Dev ice Configuration BIOS SETUP UTILITY Advanced USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Device # Emulation Type [Auto] Number of seconds POST waits for the USB mass storage device after start unit command. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. USB Mass Storage Reset Delay T his item allows you to set the reset delay for USB mass storage device. Options: 20 Sec (Def ault) / 10 Sec / 30 Sec / 40 Sec 17 TPower I45 BIOS M anual Emulation Type T his item allows you to select the emulation type of the USB mass storage device. Options: Auto (Default) / Floppy / Forced FDD / Hard Disk / CDROM Config Onboard PCI/P CI-E Devices BIOS SETU P U TILITY Advan ced Onboard PCI/PC I-E Devices Configu ration Onboard PCIE P ATA/SATA Cntlr Onboard PCIE G iga LAN Onboard LAN Bo ot ROM MAC ID Informa tion [D isabled] [A uto] [D isabled] Options Disabled Enabled +F1 F10 ESC S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx . xx (C)Copyright 1985-200x, American Me gatrends, Inc. Onboard PCIE PATA/SA TA Cntlr T his item allows you to control the onboard PAT A/SAT A controller. Options: Disabled (Default) / Enabled Onboard PCIE Giga LAN T his item allows you to control the onboard LAN. Options: Auto (Default) / Enabled / Disabled Onboard LAN Boot Rom T his item allows you to select the Onboard LAN Boot ROM. Options: Disabled (Default) / Enabled MAC ID Information T his item shows the LAN MAC ID. 18 TPower I45 BIOS M anual 3 PCIPnP Menu T his section describes con figuring the PCI bus system. PCI, or Personal Computer Interconn ect, is a system which allows I/O devices to operate at speeds nearing the speed o f the CPU itself uses when communicating with its own special components. Notice Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Main Advan ced PCIPnP BIOS SETU P U TILITY Boot Chipset O. N. E Exit Advanced PCI/P nP Settings WARNING: Setti ng wrong values in below sections may c ause system to malf unction. Clear NVRAM Plug & Play O/ S PCI Latency Ti mer Allocate IRQ t o PCI VGA Palette Snoopi ng PCI IDE BusMas ter OffBoard PCI/I SA IDE Card IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 [No] [No] [64] [Yes ] [Dis abled] [Ena bled] [Aut o] [Ava ilable] [Ava ilable] [Ava ilable] [Ava ilable] [Ava ilable] Clear NVRAM during System Boot. +F1 F10 ESC S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx . xx (C)Copyright 1985-200x, American Me gatrends, Inc. Clear NV RAM T his item allows you to clear the data in the NVRAM (CMOS) by selecting "Yes". Options: No (Default) / Yes Plug & P lay OS When set to YES, BIOS will only initialize the PnP cards used for the boot sequen ce (VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating system like WindowTM 95. For non-PnP operating systems (DOS, NetwareTM), this option must set to NO. Options: No (Default) / Yes 19 TPower I45 BIOS M anual PCI Latency Timer T his item controls how long a PCI device can hold the PCI bus bef another takes ore over. T he longer the latency, the longer the PCI device can retain control of the bus before handing it over to another PCI device. Options: 64 (Default) / 32 / 96 / 128 / 160 / 192 / 224 / 248 Allocate IRQ to PCI V GA T his item allows BIOS to choose a IRQ to assign for the PCI VGA card. Options: Yes (Default) / No Palette Snooping Some old graphic controllers need to " snoop" on the VGA palette and then map it to their display as a way to provide boot inf ormation and VGA compatibility. Options: Disabled (Default) / Enabled PCI IDE BusMaster T his item is a toggle for the built-in driver that allows the onbo ard ID E controller to perform DMA (Direct Memory Access) trans fers. Options: Enabled (Default) / Disabled OffBoard PCI/ISA IDE Card T his item is for any other non-onboard PCI/ISA IDE controller adapter. Options: Auto (Default) / Disabled IRQ3/4/5/7/9/10/11/14/15 T hese items will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. [. . . ] Note: MIN = 100 Mhz MAX = 150 Mhz +F1 F10 ESC S elect Screen S elect Item C hange Option G eneral Help S ave and Exit E xit vxx . xx (C)Copyright 1985-200x, American Me gatrends, Inc. PCIE Frequency Setting T his item allows you to select the PCIE clock control. Options: 100 (Default) / Min=100; Max=150 CPU Clock Skew Control T his item allows you to select the CPU clock skew. Options: Auto (Default) / 100ps ~ 1500ps with an interval of 100ps (G)MCH Clock Skew Control T his item allows you to select the northbridge clock skew. Options: Auto (Default) / 100ps ~ 1500ps with an interval of 100ps CPU Clock Driving Control T his item allows you to select the CPU clock driving. [. . . ]