User manual BIOSTAR T5XE CFX-SLI SETUP MANUAL

[. . . ] T5 XE/T5XE CFX-SLI Setup Ma nua l FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any purpose. [. . . ] Power on or reset the computer and then press <F12> during the POST process. Select the device contains the BIOS file and press <Enter> to enter the utility. 5. The utility will show the BIOS files and their respective information. Select the proper BIOS file and press <Enter> then <Y> to perform the BIOS update process. After the update process, the utility will ask you to reboot the system. BIOS update completes. This utility only allows storage device with FAT32/16 format and single partition. Shutting down or resetting the system while updating the BIOS will lead to system boot failure. 24 T5 X E/ T5 X E CF X -S LI D. Self Recovery System (S. R. S. ) This function can't be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. will automatically log in the default BIOS setting, and all overclock settings will be re-configured. E. Smart Fan Function Smart Fan Function is under "Smart Fan Configuration" in "Advanced Menu". When enabling Smart Fan function, Fan speed is controlled automatically by CPU/System temperature. This function will protect CPU/System from overheat problem and maintain the system temperature at a safe level. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset O. N. E Exit Advanced Settings WARNING: Setting wrong values in below sections may cause system to malfunction. > > > > > > > > > > > CPU Configuration SuperIO Configuration Hardware Health Configuration Smart Fan Configuration ACPI Configuration Onboard PCI/PCI-E Devices Configuration Intel VT-d Configuration MPS Configuration PCI Express Configuration Smbios Configuration USB Configuration Configure CPU. Select Screen Select Item EnterGo to Sub Screen F1 General Help F10 Save and Exit ESC Exit vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. Advanced Smart Fan Configuration CPU Smart Fan Smart Fan Calibration Control Mode o Fan Ctrl OFF( C) o Fan Ctrl On( C) Fan Ctrl Start value Fan Ctrl Sensitive [Disabled] BIOS SETUP UTILITY When you choice [Auto] please run the calibration to define the Fan parameters for Smart Fan control +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. 25 Motherboard Manual Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System fan functions and show CPU/System fan speed. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF() If the CPU/System temperature is lower than the set value, the CPU/ System fan will turn off. The range is from 0~127, with an interval of 1. Fan Ctrl On() The CPU/System fan starts to work when CPU/System temperature arrives to this set value. The range is from 0~127, with an interval of 1. Fan Ctrl Start Value When CPU/System temperature arrives to the set value, the CPU/System fan will work under Smart Fan Function mode. The range is from 0~127, with an interval of 1. Fan Ctrl Sensitive Increasing the value of slope PWM will raise the speed of CPU/System fan. CMOS Reloading Program It allows users to save different CMOS settings into BIOS-ROM. Users are able to reload any saved CMOS setting for customizing system configurations. Moreover, users are able to save an ideal overclock setting during overclock operation. There are 10 sets of record addresses in total, and users are able to name the CMOS data according to personal preference. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset O. N. E Exit Exit Options Save Changes and Exit Discard Changes and Exit Discard Changes Load Optimal Defaults Security Settings > Security CMOS Backup Function Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit CMOS Backup Func CMOS Data Reload CMOS Data Save vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. 26 T5 X E/ T5 X E CF X -S LI 4. 2 T-SERIES SOFTWARE Installing T-Series Software 1. The drivers installation program would appear if the Auto-run function has been enabled. [. . . ] Umgebungskontrolle, Hardware-Überwachung Lüfterdrehzahl-Controller/-Überwachung "Smart Guardian"-Funktion von ITE Dual-Kanal DDR3 Speichermodul Unterstützt DDR3 800 / 1066 / 1333 Unterstützt DDR3 1600 (OC) / 1866 (OC) registrierte DIMMs. Ultra DMA 33 / 66 / 100 / 133 Bus IDE JMB368 Master-Modus Unterstützt PIO-Modus 0~4, SATA Integrierter Serial ATA-Controller Datentransferrate bis zu 3. 0Gb/s Konform mit der SATA-Spezifikation Version 2. 0. LAN HD Audio-Unters ALC888 tützung PCI-Steckplatz Steckplätze PCI Express Gen2 x16 Steckplatz PCI Express Gen2 x 1-Steckplatz x2 x2 x2 Realtek RTL 8111DL 10 / 100 / 1000 Mb/s Auto-Negotiation Halb-/ Vollduplex-Funktion Unterstützt High-Definition Audio 7. 1-Kanal-Audioausgabe 42 T5 X E/ T5 X E CF X -S LI Spezifikationen Diskettenlaufwerkanschluss IDE-Anschluss SATA-Anschluss Fronttafelanschluss Front-Audioanschluss CD-IN-Anschluss Onboard-Ans S/PDIF Ausgangsanschluss chluss CPU-Lüfter-Sockel System-Lüfter-Sockel "CMOS löschen"-Sockel USB-Anschluss x1 x2 x1 x2 Jeder Anschluss unterstützt 2 Fronttafel-USB-Anschlüsse Serieller Anschluss Stromanschluss (24-polig) Stromanschluss (4-polig) PS/2-Tastatur Rückseiten-E /A PS/2-Maus LAN-Anschluss USB-Anschluss Audioanschluss Platinengröße 220 mm (B) X 305 mm (L) Biostar behält sich das Recht vor ohne , OS-Unterstüt zung Windows XP / Vista 32 / Vista 64 / 7 Ankündigung die Unterstützung für ein Betriebssystem hinzuzufügen oder zu entfernen. x1 x1 x1 x1 x1 x1 x6 x6 x1 x1 x6 x1 x1 x1 x1 Jeder Anschluss unterstützt 2 Diskettenlaufwerke Jeder Anschluss unterstützt 2 IDE-Laufwerke Jeder Anschluss unterstützt 1 SATA-Laufwerk Unterstützt die Fronttafelfunktionen Unterstützt die Fronttafel-Audioanschlussfunktion Unterstützt die CD Audio-In-Funktion Unterstützt die digitale Audioausgabefunktion CPU-Lüfterstromversorgungsanschluss (mit Smart Fan-Funktion) System-Lüfter-Stromversorgungsanschluss 43 Motherboard Manual FRENCH SPEC Prend en charge les technologies d'exécution de UC Socket 1156 Processeurs Intel Core i7 / i5 bit de désactivation / Intel SpeedStep® optimisée/ d'architecture Intel 64 / de mémoire étendue 64 / de virtualisation Chipset Intel P55 IT8720 Super E/S Fournit la fonctionnalité de Super E/S patrimoniales la plus utilisée. [. . . ]