User manual BIOSTAR M7VKQ

[. . . ] M7VKQ Federal Communications Commission (F. C. C. ) Statement This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Accessories: This device has been tested and found to comply with the limits of a Class B digital device; the accessories associated with this equipment are as follows: 1. (Provided by manufacturer) These accessories are required to ensure compliance with FCC Rules. [. . . ] Disabled Disable cache. External Cache This option you to enable or disable "Level 2" secondary cache which may improve performance. on the CPU CPU L2 Cache ECC Checking This item allows you to enable/disable CPU L2 Cache ECC Checking. The Choices: Disabled (default), Enabled. Quick Power On Self Test Enabling this option will cause an abridged version of the Power On Self-Test (POST) to execute after you power up the computer. Disabled Normal POST. First /Second/Third/ Boot Other Device These BIOS attempt to load the operating system from the devices in the sequence selected in these items. The Choices: Floppy, LS120, HDD-0, SCSI, CDROM, HDD-1, HDD-2, HDD-3, ZIP100, LAN, Disabled, Enabled. Swap Floppy Drive For systems with two floppy drives, this option allows you to swap logical drive assignments. The Choices: Enabled, Disabled (default). 2-10 Chapter 2 BIOS Setup Boot Up Floppy Seek Enabling this option will test the floppy drives to determine if they have 40 or 80 tracks. The Choices: Enabled (default), Disabled. Boot Up NumLock Status Selects the NumLock. Off Numpad is arrow keys. Gate A20 Option Select if chipset or keyboard controller should control Gate A20. The Choices: Normal A pin in the keyboard controller controls Gate A20. Fast (default) Lets chipset control Gate A20. Typematic Rate Setting When a key is held down, the keystroke will repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be configured. The Choices: Disabled (default) Enabled Typematic Rate (Chars/Sec) Sets the rate at which a keystroke is repeated when you hold the key down. The Choices: 6 (default), 8, 10, 12, 15, 20, 24, 30. Typematic Delay (Msec) Sets the delay time after the key is held down before it begins to repeat the keystroke. The Choices: 250 (default), 500, 750, 1000. 2-11 Chapter 2 BIOS Setup Security Option This option will enable only individuals with passwords to bring the system online and/or to use the CMOS Setup Utility. The Choices: System A password is required for the system to boot and is also required to access the Setup Utility. Setup (default) A password is required to access the Setup Utility only. This will only apply if passwords are set from the Setup main menu. APIC Mode By selecting Enabled enables ACPI device mode reporting from the BIOS to the operating system. The Choices: Enabled (default), Disabled. MPS Version Control For OS The BIOS supports versions 1. 1 and 1. 4 of the Intel multiprocessor specification. Select the version supported by the operation system running on this computer. The Choices: 1. 4 (default), 1. 1. OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. Video BIOS Shadow Determines whether video BIOS will be copied to RAM for faster execution. Disabled Optional ROM is disabled. 2-12 Chapter 2 C8000 - CFFFF Shadow / D0000 - DFFFF Shadow BIOS Setup Determines whether the optional ROM will be copied to RAM for faster execution. [. . . ] This action will boot-up the system according to FSB of the processor. 2-34 Chapter 3 Trouble Shooting 3. Power light does not illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on. PROBABLE Power cable is unplugged. CAUSE DIAGNOSIS Visually inspect power cable. SOLUTION Make sure power cable is securely plugged in. Defective power cable. Use different socket, repair outlet, reset circuit breaker or replace fuse. Faulty wall outlet; circuit Plug in device known to breaker or fuse blown. [. . . ]