User manual BIOSTAR M7NCD ULTRA

[. . . ] M7NCD Ulltra M7NCD U tra FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. [. . . ] Betreten Sie "CMOS Setup Menü" und wählen sie Default-Setting. Schließen Sie den AC-Netzstecker wieder. Anschlüsse für die Rückwand 22 Watchdog Technology It is important to know that when overclocking, the system can be at a vulnerable state. Therefore, the BIOSTAR Watchdog Technology was designed to protect your PC under dangerous over-clock situations. Any over-clocking that reaches the threshold settings, the Watchdog Technology will disable your system from rebooting in the BIOS setting. After that, press <Insert> and power on your system simultaneously to restart your system. This user-friendly design can save you from squandering your time on opening the case just to clear the CMOS. In the end, thanks to the Watchdog Technology, everything is back at a safe and sound! 23 StudioFun!It plays DVD, VCD, MP3, Audio CD and various other known file formats. You can take snapshots of video and customize the saved images as screensavers. You can also store the images on USB mass storage devices like flash disks and USB floppy disks. Hardware Requirements The supported hardware list of StudioFun!Installation CD to get the most updated information. Installation Procedure Insert the StudioFun!Installation CD in a CD/DVD ROM drive and let the system boot through the CD. The disk will boot and bring up the grub boot loader installation menu. Two options are specified. 24 Installation This option will do the basic installation of the distribution. The installation works on pre-installed windows or GNU/Linux distribution. On selecting the 'installation' option the installer boots and displays a dialog box indicating the space required and waits for a confirmation. Selecting Ok will continue the installation while selecting Cancel will terminate the installation and reboot the machine. If Windows or GNU/Linux is the only OS installed on the hard disk with no free space, it will resize the partition, either NTFS or FAT32 or ext2, and install StudioFun!. In case the hard disk has a 128MB of free space available, the installation will use the free space. After installing the base system you will be prompted to select the resolution from the following choices 1. The default is 1024x768 for high-end graphics. Next you will be prompted to choose the DVD area/region selection code. Choose this based on the type of DVDs you will be playing. The installation procedure will then probe for the type of mouse installed. In case of serial mouse you will have to move the mouse when prompted. [. . . ] Floppy/cdrom/Flashdisk - Shows the contents of the selected directory from the "List directories" field after double clicking it. Hard disk - Shows the contents of a directory called "/studiofun". Add (>>) - Click to copy selected files from a device to hard disk. Add (<<) - Click to copy selected files from hard disk to a device. [. . . ]