User manual BINATONE Z430BT EDITION 1

[. . . ] User Guide Z430BT 1st edition www. binatonegps. com Binatone Navigation software IMPORTANT IMPORTANT Satellite signals are required for this product to function in Navigation Mode. There may be occasions within your home or surrounding area when the signal strength is limited and Navigation may not be possible. If you experience difficulty in receiving a signal in your car you may need to use an external antenna (optional). You can check the number of satellite signals that the unit is receiving and the strength of those signals by viewing the GPS Receiver. [. . . ] Note: You can only enter a maximum of 10 waypoints/destination in the list, when the list is full a message will be displayed informing you that you have reached the maximum number. In Navi the unit will display the list items in numerical order, when in Simulate the first list item will be displayed with an S to indicate that it is your start point. In order to navigate you need a valid GPS signal, for simulating a route this can be done without a GPS signal. 27 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) NAVIGATION MENU Entering your Waypoints/destination Tap on the next empty list slot, this is the list item which says "Click here to add a new destination". This will always appear in the next available list slot, when in simulate the first list slot will have the text "Click here to set the starting point". The Search From screen will appear allowing you to choose your waypoint/destination from several different methods. Note: The unit will remember the last waypoints/destination used for the last journey. It may be necessary to delete these Waypoints/Destination from the list first, Before you can start a new journey. Select each Waypoint/Destination in turn and tap delete, tap OK to confirm the deletion Address The most commonly used method for entering a new waypoint/destination into the unit, when tapped the Address Search screen will open. This screen allows you to add information into several fields so that you can accurately find the location you are looking for. When a field is tapped a new screen will be displayed showing a keypad, this is to allow you to enter the desired address for your waypoint/destination. Firstly you will need to enter the city for which your waypoint/destination is located. The current country for which the address will be searched for will be shown in the top right of the screen. If you wish to change the country tap on the currently shown name, the screen will change to show you a list of available countries. Use the up/down arrows to scroll through the list, when the desired country has been found select the country be tapping on the name in the list (you will see a blue bar surround the name). Then tap OK to confirm the selection, if you do not wish to change countries tap Cancel. When entering information into the search as well as just characters you have the following special keys. To enter a space in an entry tap the button which is blank shown on the bottom row. To delete a character Tap the DEL button. 28 Binatone Help Line: 0845 345 9677 (for UK only. Local Call rate) NAVIGATION MENU To Change between Characters/Digits and Special Characters. Use the keypad to start to enter the desired city, as you enter characters you will see a list of possible matches appear as a list on the screen. As you enter further characters the list will narrow down until there are only 1 or 2 options available. [. . . ] Along with this information you will find information about the satellites you are receiving signals from. The green bars show signals which are locked, the orange bars show the signals which have been found but are not locked to. Next to these bars you will see a number this number relates to the number of the satellite for which the signal is coming from. Note; If you only have 3 locked satellite signals then you only have a 2D fix and certain information will not be available. [. . . ]