User manual BINATONE ICARUS 2010

[. . . ] TECHNICAL DETAILS Standard Frequency range Digital Enhanced Cordless Telecommunication (DECT) 1. 88 to 1. 9 GHz (bandwidth = 20 MHz) 1. 728 MHz Up to 300m outdoors; up to 50m indoors Standby: 100 hours Talking: 10 hours Battery charge time:15 hours Operating 0 C to 40 C Storage -20 C to 60 C HANDSET 500mAH NiMH 1. 2V rechargeable battery x 2, AAA size. TABLE OF CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 5 PRIVATE PHONEBOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 5. 1 5. 2 5. 3 5. 4 5. 5 5. 6 5. 7 ADD A NEW PHONEBOOK ENTRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 SEARCH A PHONEBOOK ENTRY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 VIEW A PHONEBOOK ENTRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press <MENU> and <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook. Press <UP/DOWN> to select the desired phonebook entry. 15 Note: If your answering machine is switched off, the phone will enter into the remote access mode after 10 rings. You can then enter the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. Remote operation The default code is 0000. For details of how to set a new code, see the User Guide 8. 5. 9. 1 of page 31. Note: Press <*> key after OGM playback cannot access your answering machine remotely. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 11 12 13 14 16 3. Press <UP/DOWN> to select the ringtone and press <OK> to confirm. If the call is from someone who withheld their number, e. g. an international call or from a private exchange, "OUT OF AREA" will display. If you've got new Caller Display records, the handset will display "X NEW CALLS" in standby mode. The New Calls indication will remain until all the new call records have been viewed. 6. 1 View the Call List All received calls are saved in the Call List with the latest call at the top of the list. When the call list is full, theoldest call will be replaced by a new call. Any unanswered calls which have not been viewed are marked with a <*> icon at the centre of the bottom line of the display. OR Press <MENU> and <UP/DOWN> to show CALL LIST , then press OK. Press <MENU>, <UP/DOWN> to show DETAILS, and then <OK> to display the date and time of the call. Store a Call List Number into the Phonebook Follow Steps 1 and 2 in Section 6. 1. Press <OK> to store the phonebook entry and return to the calls list. 7 Your phone comes with a selection of settings that you can change to personalise your phone the way you like it to work. 7. 1 Date and Time Settings If you subscribe to Caller Display the time and date settings will be automatically updated by the network when you receive an incoming call. The Caller Display service only sends the month and date, not the year, so you may need to set the year. (This is used to calculate the day for the time stamp on answering machine models only). Press <OK> and <UP/DOWN> to select your desired date format (DD-MM-YYor MM-DD-YY ). Press <OK> and <UP/DOWN> to select your desired time format (12 HR or 24 HR). Press <OK> and then enter the time information in 24 hour format. [. . . ] Contact the service provider (the BT engineers on 151 for UK only, or your cable company). If you still cannot identify the cause of the problem, please read out the serial number of this telephone to the Binatone Customer Service Center. The serial number can be found in the battery compartment after having the batteries removed. For technical support, call Binatone Customer Service at 0845 345 9677(UK only). The conformity to the requirements is validated by the symbol. NOTE: In compliance with Directive 2002/96/EC, when you purchase a product that comes with the symbol shown on the right, you are required to dispose of electrical and electronic equipment by separate waste collection and you cannot dispose of the product as normal waste. [. . . ]