User manual BINATONE CAPRICE 600

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BINATONE CAPRICE 600. We hope that this BINATONE CAPRICE 600 user guide will be useful to you.


BINATONE CAPRICE 600 : Download the complete user guide (2836 Ko)

Manual abstract: user guide BINATONE CAPRICE 600

Detailed instructions for use are in the User's Guide.

[. . . ] Locating the Base unit The Base unit should be placed on a level surface, in a position where: the mains adapter plug will reach an easily accessible 230-V AC switch mains supply socket - never try to lengthen the mains power cable. the telephone line cable will reach your telephone line socket or extension socket. it is not close to a sink, bath or shower, or anywhere else where it might get wet. it is not close to other electrical equipment - fridges, washing machines, microwave ovens, TVs, fluorescent lights, etc. [. . . ] To modify an existing name, press UP or DOWN button to move the cursor to the character you want to change then input the new one or press ERASE button to delete. Press BOOK button again to save the Caller Display record into the Phonebook memory. Press EXIT button to return to the standby mode. Storing an Outgoing call record into the Phonebook memory 2 3 4 5 To delete a Caller Display 1 record 2 3 Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 19 Caller Display operation continue. . . To delete all Caller Display records When the Caller Display record is displayed. Answering Machine system Outgoing Messages (OGM) An OGM is the announcement callers will hear when the machine answers a call. The Caprice 600 has two pre-recorded announcements available if you choose not to record your own OGMs. OGM2 - this informs callers to call later and does not give them the opportunity to leave a message. The default is, "Please call later. " The machine has enough memory to record about 20 minutes of messages (OGM/Caller's message/Memo). When there is no further memory available to record, it will answer after 15 rings and the machine will announce, "Memory full, please call later. " The display shows MEMORY FULL and it will be shown X alternately with M E S X A G E S and NX E XW S To play the current OGM Make sure the machine is switched on; Press OGM button. The display shows PLAY OGM and plays OGM, the current announcement. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 20 Answering Machine System continue. . . To record OGM 1 1 2 Make sure the answering machine is turned on. Note: Each OGM must be at least 3 seconds and no more than 1 minute in length. Press EXIT/ON-OFF button briefly until you hear, "Announcement 1. " Press and hold OGM button until you hear a `beep. ' The display shows OGM RECORDING and the message counter starts to count. Speak directly into the Base unit's Microphone from a distance of about 15 cms. As soon as you have finished speaking, press EXIT/ON-OFF button to stop recording. The display shows PLAY OGM and your OGM, recorded message will be played back for your approval. You will hear, "Announcement 2. " Press and hold OGM button until you hear a `beep. ' The display shows OGM RECORDING and the message counter starts to count. Speak directly into the Base unit's Microphone from a distance of about 15 cms. As soon as you have finished speaking, press EXIT/ON-OFF button to stop recording. The display shows PLAY OGM and your OGM, recorded message will be played back for your approval. 3 4 To record OGM 2 1 2 3 4 Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 21 Answering Machine System continue. . . To turn the 1 Answering machine ON or OFF 2 Press and hold EXIT/ON-OFF button to turn ON the answering system. You will hear, "Answering machine ON. " The display shows ANSWER ON and the MESSAGE light will light up. [. . . ] When you first make a call, try pressing the REDIAL/ PAUSE button for a pause between the outside line access digit (e. g. When storing numbers in memory, you can include the outside line access digit (e. g. 9) with each number. Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate. 30 Troubleshooting continue. . . If your PBX requires you to wait for a second Dial tone before dialing the telephone number, press the REDIAL/PAUSE button for a pause between the access digit and the number. If the fault persists . . . Disconnect all other instruments connected to the same line as the Caprice 600 and see whether you can make a call. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BINATONE CAPRICE 600




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BINATONE CAPRICE 600 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.