User manual BILLION BIPAC 7202

[. . . ] BiPAC 7202 / 7202GR2 (802. 11g) ADSL2+ Router User's Manual Chapter 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1 Introducing the BiPAC 7202 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 3 Applications of the BiPAC 7202 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Apply PPPoE Routed Connections PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. 42 Description: A user-definable name for this connection. NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a single ISP account, sharing a single IP address. If users on your LAN have public IP addresses and can access the Internet directly, the NAT function can be disabled. This is in the format of "username@ispname" instead of simply "username". Leave this at 0. 0. 0. 0 to automatically obtain an IP address from your ISP. Connection: Always on: If you want the router to establish a PPPoE session when starting up 43 and to automatically re-establish the PPPoE session when disconnected by the ISP. Connect to Demand: If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i. e. Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on the line for a predetermined period of time. The size of the largest datagram (excluding media-specific headers) an IP attempts to send through the interface. Apply RFC 1483 Bridged Connections Description: A user-definable name for this connection. Encapsulation method: Select the encapsulation format, this is provided by your ISP. 44 4. 3. 2. 2 DNS A Domain Name System (DNS) contains a mapping table for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www. billion. com and an IP address. An IP address is a 32-bit number in the form of xxx. xxx. xxx. xxx, for example 192. 168. 1. 254. You can think of an IP address as a telephone number for devices on the Internet, and the DNS allows you to find the telephone number for any particular domain name. Since an IP Address is hard to remember, the DNS converts the friendly name into its equivalent IP Address. You can obtain a Domain Name System (DNS) IP address automatically if your ISP has provided it when you logon. Usually when you choose PPPoE or PPPoA as your WAN - ISP protocol, the ISP provides the DNS IP address automatically. Alternatively, your ISP may provide you with an IP address of their DNS. If you choose one of the other protocols, RFC1483 Routed or Bridged, check with your ISP, as it may provide you with an IP address for their DNS server. You must enter the DNS IP address if you set the DNS Server address on your PC to the LAN IP address of this router. 45 4. 3. 2. 3 ADSL ADSL Mode: There are four modes "Open Annex Type and Follow DSLAM's Setting", "Annex A Only", "Annex L Only" and "Annex M Only" that user can select for this connection. Modulator: There are four modes "AUTO", "ADSL multimode", "ADSL2"and"ADSL2+" that user can select for this connection. DSP Firmware Version: DSP code version DMT Status: DMT Status Operational Mode: To show the state when user select "AUTO" on connect mode. [. . . ] Step 3: In the Network Connections window, click Advanced in the main menu and select Optional Networking Components . . . . The Windows Optional Networking Components Wizard window displays. Step 4: Select Networking Service in the Components selection box and click Details. 85 Step 5: In the Networking Services window, select the Universal Plug and Play check box. Step 6: Click OK to go back to the Windows Optional Networking Component Wizard window and click Next. Auto-discover Your UPnP-enabled Network Device Step 1: Click start and Control Panel. Step 2: Right-click the icon and select Properties. 86 Step 3: In the Internet Connection Properties window, click Settings to see the port mappings that were automatically created. Step 4: You may edit or delete the port mappings or click Add to manually add port mappings. Step 5: Select Show icon in notification area when connected option and click OK. [. . . ]