User manual BIFINETT KH 670 ICE CUBE MACHINE

[. . . ] Should the power cable or the plug be damaged, have the customer service replace it before you use the appliance again. When in use, do not attempt to touch anything inside the appliance, especially the cooling/heating pipes. ⷠDo not insert objects of any kind into the appliance. [. . . ] Open the lid and remove the ice cube collector container from the appliance. Pour water in up to the fill marking ("Fill Line") inside the water reservoir . Note: To achieve correctly sized ice cubes the water temperature must lie between 7°C and 32°C. - the appliance, power plug and power cable are in a faultless condition and - all packaging materials have been removed from the Ice Cube Machine. First of all, clean the appliance as Replace the ice cube collector container into the appliance and close the lid . Select the desired ice cube size: Press repeatedly on the button ice cube size ¹ until the control lamp glows under the desired size. Should the ambient temperature exceed 16°C, selecting the small or medium size is to be recommended. Important: Under no circumstances should you place your hands or fingers in the Ice Cube Machine during the freezing process!15 minutes the finished ice cubes automatically slide through the throw-out mechanism into the ice cube collector container . the Ice Cube Machine automatically interrupts the freezing process if the ice cube collector container is full or the water reservoir is empty: · The display , , Content level - Ice cube collector container" on the control panel glows: The ice cube collector container is full. Wait for 3 minutes until the cooling agent in the compressor has settled. Note: On hygienic grounds the water in the water reservoir should be changed every 24 hours. Note: Should the appliance become separated from the mains network during operation or the lamps on the control panel glow, please check to see if an ice cube is blocking the throw-out mechanism. Should this be the case, remove the plug from the wall socket and carefully move the throw-out mechanism to the rear!In the ice cube collector container the ice cubes are kept cool for a short period. For long-term storage remove the processed ice cubes from the appliance and store them in, for example, the freezer compartment of a refrigerator. Switch the appliance off when you no longer require further ice cubes. If you are not using the appliance, absolutely remove the water in it - by means of the drainage valve : Remove the plug from the wall socket. [. . . ] The throw-out mechanism , , Content level - Water reservoir" cannot move itself. The water temperature must lie between 7°C and 32°C. ⷠOperate the Ice Cube Machine with an ambient temperature of less than 32°C. [. . . ]