User manual BIFINETT KH 450 JUICE EXTRACTOR

[. . . ] · Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury. Avoiding the dangers of fire and injury: · Never allow the device to operate unattended. Children often underestimate the dangers associated with electrical equipment. Ensure that the mains plug can be easily reached and that the mains lead cannot become a trip hazard. [. . . ] - At the front there is the On/Off switch , - swivelling container with the integrated container e. g. for fruit flesh - and on the right there is the fruit juice outlet for the supplied separate container or a glass. Warning: Check that the device is switched off and the mains plug is out of the socket before assembling the device. Position the tray such that it sits firmly in the recess on the base unit. Place the top cover on to the fruit flesh tray , so that the bottom of the feed chute sits inside the filter/ sieve . Lift the interlock levers and press them into the notches in the top cover. Press the bottom part of the interlock levers against the sides of the device until they engage. -6- KH 450 6. Hang the swivelling fruit juice container ­ first in the upper hinge then in the lower one as it has enough play to engage with light pressure. Place the container so that there, for example, fruit flesh can be captured. Place the separate fruit juice container or a glass under the fruit juice outlet. The fruit juice container has a froth catcher to provide clear and froth-free fruit juice. Hold the feeding rod with one hand and insert the fruit or vegetable pieces into the filler opening with the other. Always use the feeding rod to press the fruit/vegetables carefully into the opening (refer to Figs. Tip: The lid is designed so that it can also be used as a convenient storage tray. Turn the lid the other way up on the filler opening assembly (refer to Fig. Warning: Never insert your finger or other objects into the feed opening whilst the device is operating. Note: To avoid fruit getting stuck in the feed opening, only insert the fruit when the device is switched on. If you have large quantities to process, when the juice container is full, pour the extracted juice into a larger container. If pieces of fruit become stuck in the feed opening and cannot be immediately dislodged with the feeding rod then you should follow this procedure so as not to damage the juice extractor: Preparation of the fruit / vegetables · Important: Only use well-ripened fruit as otherwise the filter can become overloaded. · Wash or peel the fruit or vegetables that you wish to process. Large pips or stones should always be removed from the fruit before juicing. · Fruit with cores (such as apples, pears) can be juiced with the skin and core. [. . . ] To remove these stains soak the stained parts in a solution of one cup of household bleach to one cup of water. Then clean the parts with washing-up liquid and rinse with clean water. Emptying the fruit container and filter 1. When processing fruit or vegetables that have a high liquid content (e. g. tomatoes, grapes, melons): Do not process more than 3 kg of fruit or vegetables before emptying the fruit flesh container. [. . . ]