User manual BIFINETT KH 1241 INDUCTION HOB

[. . . ] Do not place any metallic objects on the induction area, such as kitchen utensils or pieces of cutlery. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. Be careful when heating small volumes of cooking oils ­ do not select a high power level. [. . . ] 1 Hob 2 Display Indicator for the power stage or timer setting 3 Control Lamp Power Stage By glowing, it shows that the power stage is being shown in the display. 4 Control Lamp Timer By glowing, it shows that the timer is being shown in the display . 5 Raise or reduce the setting for the power level or the elapsed time (Timer) 6 Button - Power Setting For setting the power level (L1-L10) 7 Button - Timer For setting elapsed times of up to 180 mins for automatic switch off 8 Control lamp 9 On/Off button Switch the hob on or off, cancel the function 0 Power cable with power plug Suitable are pots and pans with a base made of steel or cast iron. These are recognisable either through the markings on the pan or if a magnet clings to the base of the pan. Unsuitable are all types of cookware made of metals to which a magnet does not cling, for example aluminium, copper and stainless steel, as well as those made of porcelain, glass, ceramics and plastics etc. Thin pan bottoms are better suited for induction cookers than thick sandwich bottoms. The very short reaction times to setting adjustments (short pre-warm time; fast metered roasting) are not possible with thick pan bases. May not exceed 26 cm, so that the pan does not overhang, · And may not be less than 16 cm, so that the energy field can actually work. The base of the pan may not be uneven, rather, it must sit flat and squarely. The workplace related noise emission of this appliance is lower than 70 dB(A). Preserve the packaging so as to be able to store the appliance under protection or to transmit it through the post, e. When you have unpacked and positioned the appliance as described above, it is now ready for use. When cookware with content is standing on the hob 1: · Insert the plug 0 into a power socket. Therefore, place it only on firm and smooth surfaces, not on textiles or fluffy surfaces, such as tablecloths. Do not place it adjacent to curtains, drapes or other textiles that, due to the airflow, could press themselves against the appliance. If, within 30 seconds of switching on, you do not select any further function, · If you activate the button On/Off 9 once again, also when it is in actual use. For safety reasons, the cookware recognition feature switches the appliance off automatically when you . Remove the cooking vessel from the hob for longer than 15 seconds, or do not place one there. Although the energy field is immediately switched off with short cookware removals, the selected function remains active. Around every 3 seconds a signal tone issues a reminder that in roughly 15 seconds the appliance will switch itself off automatically. [. . . ] This product is subject to the provisions of European Directive 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. You receive a 3-year warranty for this appliance as of the purchase date. the appliance has been manufactured with care and meticulously examined be-fore delivery. [. . . ]