User manual BIFINETT KH 1220 WINE COOLER

[. . . ] Please take note that this wine cooler is to be used exclusively for the storing of sealed bottles of wine. The appliance is not suitable for storing unsealed bottles of wine and unpacked or opened food products!So that you can disconnect the appliance quickly in the event of an emergency, do not use extension cables. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. [. . . ] Screw the adjustable feet 9 into the designated threaded holes at the corners on the underside of the appliance. When the appliance is in use, ensure that the ventilation slits and the ventilator q cannot be covered. Should the wine cooler cabinet sway a little, the unevenness of the footprint can be levelled by calibration of the adjustment feet 9. For this, turn the appropriate adjustment foot 9 until the wine cooler cabinet is standing firmly. With this wine cooler cabinet you can tune it to operate at temperatures between 4°C and 22°C. This means that, if you want to cool beverages down to 4°C, the ambient temperature may amount to no more than 19°C. You should therefore place the wine cooler cabinet at the coolest possible location, one that is not warmed up by the sun. If the room temperature is cooler than the adjusted temperature, the refrigeration switches itself off. The temperature then comes to a maximum of the ambient room temperature. To achieve a good cooling performance, lay at least three bottles in the appliance. Ensure that the power being supplied from the wall socket tallies with the power details given on the type plate. After a brief moment the display 1 shows the interior temperature of the wine cooler cabinet. When you stop pressing the button the blinking stops and the display 1 shows once again the current interior temperature. The wine cooler cabinet now slowly cools down to the programmed temperature. With the next switch-on of the appliance the temperature must be once again programmed in. If you wish, you can switch on illumination in the interior of the wine cooler cabinet. When you wish to switch the light off, press the button Light 4 once again. As the light diodes in the interior of the wine cooler cabinet have an extremely long lifespan it is not necessary, and also not possible, to exchange them. As wine warms quickly in a glass, it is better to serve it a little too cool than a little too warm. Always remove the plug 8 from the power socket before cleaning the appliance! [. . . ] In the case of a warranty claim, please make contact by telephone with our service department. The warranty covers only claims for material and maufacturing defects, not for worn parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]