User manual BIFINETT KH 1144 ELECTRIC CORKSCREW

[. . . ] This appliance is not intended for use by persons (including children) with reduced physical, sensorial or mental cabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. The wine bottle opener, battery charging unit and power supply contain no user-serviceable parts. The warranty is voided if the casing of the wine bottle opener, the battery charging unit and/or the power supply are opened! [. . . ] No liability will be taken and no guarantee will be made for damages . Resulting from charging the wine bottle opener with a battery charging unit other than the one delivered to other devices caused by charging them with the wine bottle opener battery charging unit!Using the wine bottle opener 1 Take the capsule cutter out of its compartment in the battery charging unit. 2 In order to cut open the foil sleeve covering the cork: Place the capsule cutter on the closed wine bottle as shown is figure 2. In some cases, you may need to repeat this several times until you can easily remove the capsule of the foil sleeve. Press it down strongly until the corkscrew has clearly punctured the cork. The corkscrew is drilled into the cork and then automatically pulls the cork out of the bottle. Only release the power button once the cork has been pulled out of the bottle entirely. Upon use, please make sure no liquid flows into the wine bottle opener/the battery charging unit. Release the upper button as soon as the cork falls out of the wine bottle opener. 7 After usage: Place the wine bottle opener back in the battery charging unit so as to prevent it from falling. Upon placing the wine bottle opener in the battery charging unit, please make sure that . Its opening is facing down, the front side of the power button is facing the charge level indicator on the battery charging unit and the wine bottle opener audibly clicks into the battery charging unit. If the wine bottle opener does not require charging, unplug the battery charging unit from the power outlet. If the wine bottle opener becomes weaker after using it several times, then it should be charged. To do this, place the wine bottle opener in the battery charging unit. Upon placing the wine bottle opener in the battery charging unit, please make sure that . Its opening is facing down, the front side of the power button is facing the charge level indicator on the battery charging unit and the wine bottle opener audibly clicks into the battery charging unit. If the wine bottle opener has been placed in the battery charging unit properly, then the charge level indicator will be illuminated. Leave the wine bottle opener in the battery charging unit for between 12 and 16 hours. The length of time required to recharge the batteries depends on how weak the batteries were. After charging is complete, the wine bottle opener is ready for use again. [. . . ] Dispose of the appliance through an approved dis-posal centre or at your community waste facility. All consumers are statutorily obliged to dispose of batteries at the collection point in their community/district or with the original supplier. The purpose of this obligation is to ensure that batteries can be disposed of in an environmentally friendly manner. The warranty for this appliance is for 3 years from the date of purchase. [. . . ]