User manual BIFINETT KH 1133 PLASTIC WATER HEATER WITH THERMOSTAT

[. . . ] Minst till MINI-märket, så att apparaten inte överhettar, maximalt till MAX-märket, så att inget kokande vatten skvalpar ut. It is not intended for use with other liquids or in commercial or industrial environments. [. . . ] Hot steam may escape, and the kettle is also very hot during operation. Make certain that the device rests firmly and vertically before switching it on. Never let children or frail persons operate the device unsupervised because they may not always properly appreciate the possible dangers. Keep this manual for future reference and pass it on with the device to any future users!­ ­ the device, power plug and power cord are in perfect condition and . Warning: Pull the power plug out of the power socket before removing the kettle from the base. This prevents any water spilling out from falling on the electrical connections in the base, which could cause a short-circuit. Fill the device with water up to the MAX mark and let the water come to a full boil as described in the next section. This saves energy, water and time: · Remove the kettle from the base before filling it!Only then will the level indicator on the side correctly indicate the amount of water. To at least the MIN mark so that the device does not overheat, no higher than the MAX mark so that no boiling water spills out. An open housing can create the risk of a life-threatening electrical shock. [. . . ] Danger: You can avoid the risk of accidents caused by playing children by making the device inoperable by removing the power plug before disposing of the device. After cleaning, insert the screen from above and press it firmly into place. [. . . ]