User manual BIFINETT KH 1101 1.5 L KETTLE

[. . . ] It is not intended for use with other liquids or commercial or industrial use. Please ensure that the base and its lectrical connections never get in contact with water. [. . . ] Do not allow children or infirm persons to handle it without supervision because they may not always be able to correctly assess potential hazards. Please retain these instructions for later questions and give them to the next owner when you pass on the toaster. Fill the kettle with water to the MAX mark and let it come to a boil once as described in the next number. A lamp in the window of the level indicator indicates that the kettle is now heating up. In order to interrupt heating, push the ON switch up again (the lamp also goes out in this case). Please pull the plug out of the socket before you lift the pot from the base. This prevents water from spilling onto the electrical connections in the base and causing a short-circuit. For safety reasons and to avoid injuries do not open the lid when the water is boiling or very hot. Hold the pot vertically when filling it to ensure that the level indicator on the side properly indicates the water level. ­ at least to the MIN mark to ensure that the kettle does not overheat, ­ no more than to the MAX mark to ensure that boiling water does not spill over. And place the pot on the base until it is set on its base completely straight. An open housing can create the risk of a life-threatening electrical shock. [. . . ] The warranty conditions and service address can be found in the enclosed warranty slip. ­ minst upp till MIN-markeringen, så att vattenkokaren inte överhettas, ­ maximalt upp till MAX-markeringen, så att inget kokande vatten skvätter ut. [. . . ]