User manual BIFINETT KH 1090 ELECTRIC FONDUE

[. . . ] Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. Immediately remove the electrical plug from the socket in cases of danger. Never use the appliance for purposes other than those for which it was intended. Always remove the power cable from the wall socket, and also from the appliance, if the appliance is not in use, when removing components and before cleaning it. [. . . ] Also, do not use the fondue-pot 3 as a cooking implement on other heat sources (e. Pour the amount of cooking oil or bouillon required for the selected dish into the fondue pot 3. Never fill the fondue pot 3 with cooking oil or Bouillon to less than the Min. Never place spices, herbs or similar flavourings into the oil as these burn very quickly in hot oil. Should you wish to use herbal oil preparations, the herbs must be removed from the oil before filling the fondue-pot 3. Use a piece of kitchen-roll paper to dab all of the ingredients dry before placing them in the fondue-pot 3. Completely thaw deep-frozen ingredients before placing them into the fondue-pot 3. The different heat settings on the temperature regulator 6, as well as the time details, are to be considered as guiding values only. Using the fondue pot for serving and keeping food warm If you wish to use the fondue-pot 3 for serving and keeping food warm . Remove the power cable 4, first from the wall socket and then from the thermo-plinth 5. Insert the power cable 4 first back into the thermo-plinth 5 and then into a wall socket. After pre-heating, place the ingredients for the individual dish into the fondue-pot 3. Place the fondue-pot 3 with the food to be kept warm onto the thermo-plinth 5. Turn the temperature regulator 6 to heating level 1-2 for the keeping warm of liquid dishes such as soup etc. Remove the power cable 4 from both the wall socket and the thermo-plinth 5 when the appliance is not being used. Always wait until the thermo-plinth 5 and the fondue-pot 3 have cooled down completely before packing the Electrical Fondue and its components away after use. For the sake of safety, always store the Electrical Fondue out of the reach of children. First of all remove the power cable 4 from the wall socket before cleaning the Electrical Fondue and its components!Check to see that the power cable is correctly connected to the wall socket. Check to see if the wall socket to which the Electrical Fondue is connected is "live", in that another appliance is connected to it. Remove the power cable from the wall socket and allow the thermo-plinth 5 to cool down completely. Should the malfunction not be corrected by the measures described above, please make contact with one of our service-partners in your locality. [. . . ] This will cool the oil too quickly and the pores of the meat will not close quickly enough. A piece of fresh Ginger (4 cm long) · Put all of the meats separately into freezer bags and place them in the freezer for approx. Afterwards, cut all of the meats into wafer-thin slices and lay them, slightly overlapping, onto a plate. Allot the soya sauce into four small bowls and then whisk an egg yolk into each one. [. . . ]