User manual BIAMP VOIP SHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BIAMP VOIP. We hope that this BIAMP VOIP user guide will be useful to you.


BIAMP VOIP SHEET: Download the complete user guide (286 Ko)

Manual abstract: user guide BIAMP VOIPSHEET

Detailed instructions for use are in the User's Guide.

[. . . ] VoIP-2 Card FAQ The VoIP-2 Card is an outstanding new product that allows AudiaFLEX to leverage the power and flexibility of VoIP telephone systems for distance conferencing over audio systems. [. . . ] Proxy servers can also be set to disallow certain Codecs. Do we need PoE switches? The VoIP-2 Card does not require a PoE switch to operate, although using a PoE switch will not damage the card. Can we set any of the configurations from a call manager? The VoIP-2 Card generically interacts with many SIPbased systems, so all configurations are set via Audia ® software rather than any other third party interface. 8 How do we define the extension number/subscriber number? Once an extension number has been established by your IT Department, it is simply entered into the Audia Software then loaded to the VoIP-2 Card. Biamp has made an advanced settings form available to your IT Department to provide essential information to the Audia programmer. Which call managers will it work with? The VoIP-2 Card is designed to work with SIP-based proxy servers. 9 Can we see the MAC Address anywhere? Once a file has been loaded into the AudiaFLEX, the MAC Address is available in the status field of the advanced VoIP settings. 10 Will the VoIP-2 Card work with DHCP?Can we set a static IP if needed? The VoIP-2 Card default is to obtain network settings via DHCP. If this is not desired, the IP information can be set statically within the network settings page of the VoIP console control dialog in Audia ® software. 16 17 Will the CISCO settings confuse the cards? Cisco, or any other third party device manufacturer, has no control of the VoIP-2 Cards. Therefore the settings will have no bearing on VoIP-2 Card performance. How do we dial? Dialing is achieved via Audia software, although there are several different ways that an end-user can access a dialing device. Biamp has a software program called daVinciTM that can be used to control a softphone VoIP dialer, as well as many other aspects of the conference audio system. [. . . ] A r c t i c D r i v e | B e Av e r t o n , o r e g o n | 9 7 0 0 5 | U S A | + 1 . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BIAMP VOIP




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BIAMP VOIP will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.