User manual BIAMP EQ-140 SERVICE

[. . . ] The Vocia software interface permits comprehensive adjustment of ANC parameters. The ANC-1 utilizes IEEE compliant Power over Ethernet (PoE) technology. FEATURES right 002 ANC-1 · Automatic, adaptive volume adjustment based on ambient noise sensing and processing · 48V phantom power · Wall mountable · CobraNet audio/control with dynamic use of available bundles, plus power over single Ethernet cable · Status LEDs · Sturdy component housing · CE marked and RoHS compliant · Covered by BIAMP Systems' warranty 3 ANC-1 setup ANd use Setup and Use The Vocia software provides an intuitive interface for configuration of the ANC-1. [. . . ] For more details on setup of the ANC-1 operational parameters please consult the Vocia Help File. Device ID The rotary ID switches are located on the ANC-1 and give the unit a unique Device ID. All ANC-1 units must have a unique Device ID to function within a Vocia Paging World (i. e. , it is not possible to have two ANC-1 units with the same Device ID of hex 07). To assign a Device ID of hex 07, turn the LSB switch to 7 and leave the MSB switch on 0. To create an ID of hex B7, turn the LSB switch to 7 and turn the MSB switch to B. Device ID switches should be set using a 0. 1 inch (2. 5mm) to 0. 12 inch (3. 0mm) flat blade screwdriver. More information on setting IDs and the hexadecimal numbering scheme used in Vocia can be found in the Vocia Help File. Please note: Changes made to the Device ID while connected to the network require a power cycle in order to take effect. All CobraNet routing and bundle assignments are processed by the Vocia devices locally. Network Connection The ANC-1 has one RJ45 connector that should be wired to standard copper Ethernet cabling to interface the ANC-1 to a Vocia system via a PoE-compliant network switch. Be aware of conditions in an enclosed rack that may cause the temperature to exceed ambient room conditions. 232. 3mm, 9. 146" 245mm, 9. 64" 585. 0266. 90A 6 ANC-1 speCifiCAtiONs Ambient Noise Compensation 1 SPECIFICATIONS Ambient Noise Input Configuration: 2x balanced mic/line level Phantom power: 48 VDC (7mA/ input) Compliant with IEC 1938 Plug-in barrier strip connectors 8k ohms (mic/line balanced) 0dB ­ +66dB RJ45 with shielded Ethernet/ PoE cable (CAT5, CAT5e, CAT6, or CAT7) Environment RT60: 300mS to 2 Seconds Input Impedance: Input gain range: Network Connection: Metering: Power: Overall Dimensions Height: Width: Depth: Weight: Ambient Operating Temperature Range: Compliance: Ambient Level; Program Level; Compensation 802. 3af (PoE) Class 2 1. 279 inches (32 mm) 9. 646 inches (245 mm) 4. 724 inches (120 mm) Approx 1. 65 lbs (750 g) Compensation Range: Compensation Ratio: Ramp In/Out Times: +/- 25dB 0. 25:1 to 4:1 Minimum 1dB/Second; Maximum 10dB/Second 32-113 degrees F (0-45 degrees C) EU Directive 2002/95/EC, RoHS directive CE marked Ambient Noise Compensation 1 BLOCk DIAgRAm Mic / line input Pre-amp with phantom power Host Processor CobraNet Processor CobraNet Audio and Control A/D PoE 7 ANC-1 wArrANty BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below. 2 If you notify BIAMP during the warranty period that a BIAMP Systems product fails to comply with the warranty, BIAMP Systems will repair or replace, at BIAMP Systems' option, the nonconforming product. As a condition to receiving the benefits of this warranty, you must provide BIAMP Systems with documentation that establishes that you were the original purchaser of the products. Such evidence may consist of your sales receipt from an authorized BIAMP Systems dealer. Transportation and insurance charges to and from the BIAMP Systems factory for warranty service shall be your responsibility. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by BIAMP Systems to make repairs; or installed in any manner that does not comply with BIAMP Systems' recommendations. Electro-mechanical fans, electrolytic capacitors, gooseneck microphones, cords connecting handheld microphones, hard-drives, displays, and normal wear and tear of items such as paint, knobs, handles, keypads and covers are not covered under this warranty. This warranty is in lieu of all other warranties, expressed or implied. [. . . ] This warranty is in lieu of all other warranties, expressed or implied. BIAMP Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. [. . . ]