User manual BIAMP DDP-281 DIGITAL DYNAMIC PROCESSOR OPERATOR

[. . . ] In most circumstances, this connection is not used, and power is instead provided at the Power + Data connection (see below). An external power supply may be necessary if CobraNet® network switches do not provide Power-Over-Ethernet (PoE) and PoE adapters are not available, or if it is desirable to perform certain Networked Paging Station-1 setup functions without an available CobraNet network connection (PoE). power + data: This RJ45 connector utilizes CAT5 cabling to interface the Networked Paging Station-1 to an AudiaFLEX system. This connection is made to the primary CobraNet port of an AudiaFLEX unit, either directly (single station) or via network switches (multiple stations). [. . . ] To enter setup, turn the Scroll Wheel while holding down all three buttons (Cancel, Enter, & Push-To-Talk). An icon in the lower-left corner of the LCD panel indicates that pressing the Cancel button will return the unit to normal operation. Some setup can instead be done via Device Maintenance in Audia® software. To name the unit, scroll to the ID Tag icon and press the Enter button. Use the Scroll Wheel and Enter button to select the desired characters. This 'Station ID' must match that of a corresponding block in the AudiaFLEX design. More than one unit may be identified with the same design block (same ID). To edit the network configuration, scroll to the Network icon and press Enter. The default setting (Automatic) allows the unit to be configured dynamically. Use this setting in all cases, except when adding CobraNet® to an existing Ethernet network (not recommended). These settings may instead be assigned via software Device Maintenance. Also indicated are the quantity of selected and available paging zones, as well as the time remaining before Page Timeout (if a Timeout period has been specified). Setup screen - Mic icon Edit Mic Gain screen Setup screen - Button Order icon Edit Button Order screen Setup screen - Lock icon Enter Lock Code screen Single Button Page selection Multi-Button Page selection Initiating Chime Page In Progress 5 Networked Paging Station-1 - System Connections Networked Paging Station-1 units are connected to an AudiaFLEX system via Ethernet switches, forming a dedicated CobraNet® network. In systems designs that include multiple AudiaFLEX units, all Networked Paging Station-1 units and all AudiaFLEX units should be connected together on a common CobraNet network. In the system design, each Networked Paging Station-1 unit is associated by name with a Networked Paging Station block (Station ID). Multiple Networked Paging Station-1 units may be assigned the same name (Station ID), and will assume identical page routing schemes (soft-buttons) as those programmed in the corresponding Networked Paging Station-1 block. However, other settings (such as Net Config, Password, Button Mode, Page Timeout, Mic Gain, and Button Order) may be customized per unit during setup. 6 Networked Paging Station-1 - System Connections 7 SPECIFICATIONS & BLOCK DIAGRAM 8 WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below. If you notify BIAMP during the warranty period that a BIAMP Systems product fails to comply with the warranty, BIAMP Systems will repair or replace, at BIAMP Systems' option, the nonconforming product. As a condition to receiving the benefits of this warranty, you must provide BIAMP Systems with documentation that establishes that you were the original purchaser of the products. Such evidence may consist of your sales receipt from an authorized BIAMP Systems dealer. Transportation and insurance charges to and from the BIAMP Systems factory for warranty service shall be your responsibility. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by BIAMP Systems to make repairs; or installed in any manner that does not comply with BIAMP Systems' recommendations. [. . . ] BIAMP SYSTEMS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. No agent, employee, distributor or dealer of Biamp Systems is authorized to modify this warranty or to make additional warranties on behalf of Biamp Systems. statements, representations or warranties made by any dealer do not constitute warranties by Biamp Systems. [. . . ]