User manual BIAMP AUDIAFLEX TI-2 CARD SHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BIAMP AUDIAFLEX TI-2 CARD. We hope that this BIAMP AUDIAFLEX TI-2 CARD user guide will be useful to you.
 |
BIAMP AUDIAFLEX TI-2 CARD SHEET: Download the complete user guide (1621 Ko) |
Manual abstract: user guide BIAMP AUDIAFLEX TI-2 CARDSHEET
Detailed instructions for use are in the User's Guide.
[. . . ] ®
Audia ® TI-2 Card Dual-Channel Telephone Interface
TI-2 dual-channel Telephone Interface Cards allow AudiaFLEX to connect directly to standard analog lines. [. . . ] parameters: Country Selection, Receive/Transmit Levels, DTMF Transmit Level, Hook Flash Duration, DTMF Side Tone Level, Caller ID Enable, Redial Enable, Caller ID Type, DTMF Decode Enable, Hybrid Balance, LEC Enable, LEC Adaptive/Static, Echo Span, Noise Suppression Enable, Noise Suppression Depth, Loopback Mode, Last Number Data, Caller ID Data, DTMF Decode Data, Line Voltage/Current/Fault Data. commands: On/Off Hook, Dial, Redial, Recall Last Number Data, Hook Flash, Noise Suppression Enable, Noise Suppression Depth, Recall Caller ID Data, Clear Caller ID Data, Recall DTMF Data, Clear DTMF Data, Recall Line Voltage/Current/Fault Data, Recall Line Status, Mute Receive Audio, Mute Transmit Audio. messages: Incoming Call, Off Hook, On Hook, DTMF Decode, Dial Tone Detected/Removed, Busy Tone Detected/Removed, Ring Tone Detected, Line Fault Detected/Removed, Line Intrusion Detected/Removed, Line In Use, Line Available, Call Waiting ID Received.
Biamp Systems, 10074 S. W. Arctic Drive, Beaverton, Oregon 97005 U. S. A.
(503) 641-7287
www. biamp. com
®
Audia® TI-2 Card SPECIFICATIONS Ringer Equivalency Number: Dynamic Range: Frequency Response: 0. 0B 67dB 250Hz~3. 4kHz THD: Transhybrid Balance: Compliance: < 0. 3% 30dB
AES48-2005 Grounding & EMC practices EU Directive 2002/95/EC, RoHS directive
ARCHITECTS & ENGINEERS SPECIFICATION
The telephone interface shall be a two-channel card for AudiaFLEX hardware, and shall allow direct connection to standard analog telephone lines. Each channel shall provide normal 2-wire to 4-wire 'hybrid' functions, as well as line-echo cancellation, noise suppression, caller ID decoding, ring detection/validation, DTMF tone dialing, DTMF decoding, and call progress tone decoding. The telephone interface shall allow AudiaFLEX to respond to DTMF control commands such as preset recalls from any telephone system. [. . . ] Arctic Drive, Beaverton, Oregon 97005 U. S. A.
(503) 641-7287
www. biamp. com 18Dec06 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BIAMP AUDIAFLEX TI-2 CARD
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BIAMP AUDIAFLEX TI-2 CARD will begin.