User manual BIAMP AP4609 AND AP4611 MIXER PREAMPLIFIERS

[. . . ] The information supplied by this manual relates to physical connections and assignment. For more details on software setup, please consult the Vocia Help File. Network Connection In contrast to all other devices in the Vocia product range, the ELD-1 does not require setting a Device ID. [. . . ] Please connect the device to a PoE-compliant network and at the end of the speaker line. PoE-enabled network switches or PoE midspan adapters must be used to power the ELD-1. The maximum distance between any unit and an Ethernet switch is 328 feet (100 meters) when using copper cabling. Additional Ethernet switches and/or fiber-optic cable can be used to further extend distances between units on a network. If other network traffic shares an Ethernet switch with the Vocia network, a managed switch should be used with separate VLANs. The following diagrams illustrate valid network connections for the ELD-1. Ethernet switch with PoE ELD-1 Ethernet switch without PoE ELD-1 PoE injector AC Power CobraNet The RJ45 connector has one RJ45 connector that should be wired to standard copper Ethernet cabling to interface the ELD-1 to a Vocia system via a PoE-compliant network switch. The RJ45 connector provides two LEDs that indicate Ethernet link and network activity. 4 ELD-1 sEtup anD usE Speaker Line Connector A plug-in barrier-strip connector on the ELD-1 connects the device to the end of the speaker line. As a condition to receiving the benefits of this warranty, you must provide BIAmP Systems with documentation that establishes that you were the original purchaser of the products. Such evidence may consist of your sales receipt from an authorized BIAmP Systems dealer. Transportation and insurance charges to and from the BIAmP Systems factory for warranty service shall be your responsibility. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by BIAmP Systems to make repairs; or installed in any manner that does not comply with BIAmP Systems' recommendations. Electro-mechanical fans, electrolytic capacitors, gooseneck microphones, cords connecting handheld microphones, hard-drives, displays, and normal wear and tear of items such as paint, knobs, handles, keypads and covers are not covered under this warranty. This warranty is in lieu of all other warranties, expressed or implied. BIAmP Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. [. . . ] This warranty is in lieu of all other warranties, expressed or implied. BIAmP Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. [. . . ]