User manual BIAMP 19 SERIES MIXING CONSOLE MODELS 119 AND 619

[. . . ] (3. 9kg) internalInput: Maximum system design is completely user definable via PC software, and can be controlled via daVinciTM +24dBu AES48-2005 Grounding & EMC practices balanced screens, softwaremic/line inputs RS-232 control systems, and/orCompliance: a variety of optional remote control devices. unbalanced stereo line inputs Multi-unit Nexia systems can be created utilizing Ethernet and NexLink digital Directive 2002/95/EC, RoHS directive CE marked UL listed Input Gain Range (variable): 0dB ~ +66dB balanced mic/line inputs 0dB ~ +18dB unbalanced stereo line inputs FEATURES REAR PANEL DIAGRAM Nexia PM · 4 mic/line BIAMP SYSTEMS 6 stereo program line inputs inputs & · 6 line outputs (configurable as stereo pairs) · Ethernet port for software configuration/control UL · serial port for third-party RS-232 remote control · remote control bus for dedicated control panels · NexLink ports for multi-unit system designs Nexia BLOCK DIAGRAM · Nexia software for Windows® XP Professional/Vista · pre-configured I/O with definable processing TCP/IP · mix, route, combine, EQ, delay, control, etc. [. . . ] Control · RoHS compliance and AES grounding practices Comms · CE marked and UL listed · covered by Biamp Systems' five-year warranty designed and assembled in the USA www. biamp. com NexLink Rx · Ability to select, view, and calibrate: CAUTION RISK OF ELECTRICAL SHOCK. DO NOT OPEN. 10 9 8 7 6 5 Class 2 wiring Remote Control Bus serial 6 5 4 outputs 3 2 1 L -L Mixers: standard, automatic, matrix, combiners mic/line inputs 4 3 2 1 C R US -R Equalizers: graphic, parametric, feedback R - Filters: HPF, LPF, high shelf, low shelf, all-pass stereo line inputs - Crossovers: 2-Way, 3-Way and 4-way - Dynamics: leveler, comp/limiter, ducker, ANC - Routers: 2x1 ~ 32x32 - Delays: 0 ~ 2000 ms Remote Control Bus LISTED 52SJ 100-240V~ 50/60Hz 65 Watts, 1. 0 A term 24VDC @ 0. 5A hi lo Ethernet NexLink Tx - Controls: levels, presets, logic, RS-232, etc. RS-232 - Meters: signal present, peak, RMS - Generators: tone, pink-noise, white-noise - Diagnostics: transfer function MicroProcessor ARCHITECTS & ENGINEERS SPECIFICATION The DSP presentation mixer shall provide four balanced mic/line inputs and six balanced line outputs on plug-in Memory barrier-strip connectors, plus six unbalanced stereo line inputs on RCA connectors. Inputs and outputs shall be analog, with internal 24-bit A/D & D/A converters operating at a sample rate of 48kHz. NexLink connections shall allow sharing of digital audio within multi-unit systems. Software shall be provided for creating/connecting DSP system components within each hardware unit. Available system components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/gain controls, routers, delays, remote controls, meters, generators, and diagnostics. Inputs and outputs shall be analog, with internal 24-bit A/D & D/A converters operating at a sample rate of 48kHz. NexLink connections shall allow sharing of digital audio within multi-unit systems. Software shall be provided for creating/connecting DSP system components within each hardware unit. Available system components shall include (but not be limited to) various forms of: mixers, equalizers, filters, crossovers, dynamics/gain controls, routers, delays, remote controls, meters, generators, and diagnostics. Ethernet communications shall be Analog Analog A/D DSP Cluster D/A utilized for software control and configuration. After initial programming, processors may be controlled via dedicated software Inputs Outputs screens, third-party RS-232 control systems, and/or optional remote control devices. Software shall operate on a PC computer, with network card installed, running Windows® XP Professional/Vista. [. . . ] Software shall operate on a PC computer, with network card installed, running Windows® XP Professional/Vista. The DSP presentation mixer shall be CE marked, UL listed, and shall incorporate AES48-2005 Grounding & EMC practices. [. . . ]