Detailed instructions for use are in the User's Guide.
[. . . ] Intended for a variety of videoconferencing applications, Nexia VC uses Biamp's proprietary SonaTM AEC algorithm for more natural sound and full-duplex transmission of speech. [. . . ] The internal system design is completely user definable via PC software, and can be controlled via daVinciTM software screens, RS-232 control systems, and a variety of optional remote controls. Multi-unit Nexia systems can be created utilizing Ethernet and NexLink digital audio linking.
FEATURES
· · · · · · · · · · · · 8 wide-band AEC balanced mic/line inputs 2 standard balanced mic/line inputs 4 balanced mic/line outputs codec interface with balanced line input & output Ethernet port for software configuration/control serial port for third-party RS-232 remote control NexLink ports for multi-unit system designs Nexia software for Windows® XP Professional/Vista pre-configured I/O with definable processing RoHS compliance and AES grounding practices CE marked and UL/C-UL listed covered by Biamp Systems' five-year warranty · Ability to select, view, and calibrate: ° Mixers: standard, automatic, matrix, combiners ° Equalizers: graphic parametric, feedback ° Filters: HPF, LPF, high shelf, low shelf, all-pass ° Crossovers: 2-Way, 3-Way and 4-Way ° Dynamics: leveler, comp/limiter, ducker, ANC ° Routers: 2x1 ~ 32x32 ° Delays: 0 ~ 2000ms ° Controls: levels, presets, logic, RS-232, etc. ° Meters: signal present, peak, RMS ° Generators: tone, pink-noise, white-noise ° Diagnostics: transfer function
ARCHITECTS & ENGINEERS SPECIFICATION
The videoconference DSP shall provide eight wide-band SonaTM AEC balanced mic/line inputs, two standard balanced mic/line inputs, four balanced mic/line outputs, and codec audio input/output on plug-in barrier-strip connectors. Inputs and outputs shall be analog, with internal 24-bit A/D & D/A converters operating at a sample rate of 48kHz. The videoconference DSP shall be Nexia® VC.
Biamp Systems, 10074 S. W. Arctic Drive, Beaverton, Oregon 97005 U. S. A.
(503) 641-7287
www. biamp. com
Nexia VC SPECIFICATIONS
Frequency Response (20Hz~20kHz @ +4dBu): THD+N (20Hz~20kHz @ +4dBu): line level mic level Equivalent Input Noise (20Hz~20kHz, 66dB gain, 150 ohm): Dynamic Range (20Hz~20kHz, 0dB): Maximum Gain (input channels): Crosstalk (channel-to-channel @ 1kHz): line level mic level Input Impedance (balanced): mic/line inputs codec input Input Gain Range (variable trim): mic/line inputs codec input Maximum Input (mic/line): +0/-0. 4dB < 0. 006% < 0. 05% -125bBu > 105dB 66dB < -80dB < -75dB 8k ohms 15k ohms 0dB ~ +66dB 0dB ~ +18dB +24dBu Output Impedance (balanced): Maximum Output (balanced): Full Scale Output Level (six selections) Tail Length: Convergence: Sampling Rate: A/D - D/A Converters: Phantom Power: Power Consumption (100~240VAC 50/60Hz): Dimensions: height width depth Weight: Compliance: 200 ohms +24dBu -31dBu ~ +24dBu up to 300ms up to 100dB/sec 48kHz 24-bit +48 VDC (7mA/input 65 watts 1. 75 inches (45mm) 19 inches (483mm) 11. 15 inches (283mm) 8. 6 lbs. (3. 9kg) AES48-2005 Grounding & EMC practices EU Directive 2002/95/EC, RoHS directive CE marked UL listed
Nexia VC REAR PANEL DIAGRAM
BIAMP SYSTEMS
designed and assembled in the USA www. biamp. com
NexLink Rx Remote Control Bus outputs codec output codec input mic/line inputs 10 9
CAUTION
RISK OF ELECTRICAL SHOCK. DO NOT OPEN.
C
UL
R
Class 2 wiring
US
serial
4
3
2
1
8
7
6
5
AEC inputs
4
3
2
1
LISTED
52SJ
100-240V~ 50/60Hz 65 Watts, 1. 0 A
term
24VDC @ 0. 5A
hi lo
Ethernet
NexLink Tx
Nexia VC BLOCK DIAGRAM
TCP/IP Control Comms Remote Control Bus RS-232
MicroProcessor
Memory
Analog Inputs
A/D
DSP Cluster
D/A
Analog Outputs
NexLink Rx
NexLink Tx
Biamp Systems, 10074 S. W. [. . . ] DO NOT OPEN.
C
UL
R
Class 2 wiring
US
serial
4
3
2
1
8
7
6
5
AEC inputs
4
3
2
1
LISTED
52SJ
100-240V~ 50/60Hz 65 Watts, 1. 0 A
term
24VDC @ 0. 5A
hi lo
Ethernet
NexLink Tx
Nexia VC BLOCK DIAGRAM
TCP/IP Control Comms Remote Control Bus RS-232
MicroProcessor
Memory
Analog Inputs
A/D
DSP Cluster
D/A
Analog Outputs
NexLink Rx
NexLink Tx
Biamp Systems, 10074 S. W. [. . . ]