User manual BERNEX GB41304 CATALOGUE 2010

[. . . ] IN NO EVENT SHALL BERNEX, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF BERNEX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY BERNEX. BERNEX ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. [. . . ] This 9-pin COM1 port is for pointing devices or other serial devices. 10. PS/2 Keyboard port (purple). This port is for a PS/2 keyboard. 1. 10. 2 1. Internal connectors This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector. AGND NC SENSE1_RETUR SENSE2_RETUR Front panel audio connector (10-1 pin AAFP) AGND NC NC PIN 1 AAFP PORT1 L PORT1 R PORT2 R SENSE_SEND PORT2 L P8H61/USB3 R2. 0 HD-audio-compliant pin definition Legacy AC’97 compliant definition P8H61/USB3 R2. 0 Front panel audio connector • We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability. • If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. See section 2. 5. 6 Onboard Devices Configuration for details. Chapter 1: Product introduction MIC2 MICPWR Line out_R NC Line out_L NC 1-27 2. These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. ATX12V +12V DC +12V DC ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) EATXPWR +3 Volts +12 Volts +12 Volts +5V Standby Power OK GND +5 Volts GND +5 Volts GND +3 Volts +3 Volts PIN 1 P8H61/USB3 R2. 0 PIN 1 GND +5 Volts +5 Volts +5 Volts -5 Volts GND GND GND PSON# GND -12 Volts +3 Volts P8H61/USB3 R2. 0 ATX power connectors • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2. 0 (or later version) and provides a minimum power of 350 W. Otherwise, the system will not boot up. • We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support. asus. com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details. 1-28 GND GND BERNEX GB41304 Series 3. Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM CPU and chassis fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) CHA_FAN P8H61/USB3 R2. 0 P8H61/USB3 R2. 0 fan connectors Do not forget to connect the fan cables to the fan connectors. Chapter 1: Product introduction 1-33 1-34 BERNEX GB41304 Series Chapter 2 BIOS information 2. 1 Managing and updating your BIOS Save a copy of the original motherboard BIOS file to a USB flash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the BERNEX Update utility. 2. 1. 1 The BERNEX Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. • BERNEX Update requires an Internet connection either through a network or an Internet Service Provider (ISP). • This utility is available in the support DVD that comes with the motherboard package. BERNEX Update utility Installing BERNEX Update To install BERNEX Update: 1. 2. 3. Place the support DVD in the optical drive. Follow the onscreen instructions to complete the installation. Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS To update the BIOS: 1. 2. From the Windows® desktop, click Start > Programs > BERNEX > AI Suite II > AI Suite II X. XX. XX to launch the AI Suite II utility. Click Update button from the Quick Bar, and then click BERNEX Update from the popup menu. From the list, select either of the following methods: Updating from the Internet a. b. c. Select Update BIOS from the Internet, then click Next. Select the BERNEX FTP site nearest you to avoid network traffic, then click Next. From the FTP site, select the BIOS version that you wish to download then click Next. Chapter 2: BIOS information 2-1 The BERNEX Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating from a BIOS file 3. a. b. Select Update BIOS from file, then click Next. Locate the BIOS file from the Open window, then click Open. Follow the onscreen instructions to complete the updating process. 2. 1. 2 The BERNEX EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility. Before you start using this utility, download the latest BIOS file from the BERNEX website at www. asus. com. BERNEX EZ Flash 2 To update the BIOS using EZ Flash 2: 1. 2. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select BERNEX EZ Flash 2 Utility and press <Enter> to enable it. Exit BERNEX EZ Flash 2 Utility V01. 04 Flash Info MODEL: P8H61/USB3 R2. 0 File Path: fs0:\ Drive Info fs0:\ Folder Info 02/10/2012 10:23p 8388608 H61U3R2. CAP VER: 0206 DATE: 02/10/2012 Insert the USB flash disk that contains the latest BIOS file to the USB port. File Info MODEL: Help Info VER: DATE [Enter] Select or Load [Tab] Switch [Up/Down/PageUp/PageDown/Home/End] Move [Esc] Exit 2-2 BERNEX GB41304 Series 3. 4. 5. 6. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then press <Enter>. Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform the BIOS update process. • This function supports USB flash disks with FAT 32/16 format and single partition only. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. [. . . ]