User manual BENQ W10000

[. . . ] W10000/W9000 Digital Projector Home Cinema Series User Manual Welcome Copyright Copyright © 2006-2007 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. All trademarks and registered trademarks are the property of their respective owners. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes. Warranty BenQ warrants this product against any defects in material and workmanship, under normal usage and storage. [. . . ] · Preset Family Room Mode: Brightness is emphasized in this mode and is best suited for use in rooms with normal lighting levels. It is good for watching TV programs, playing games or seeing bright movies. · Preset Photo Mode: designed for viewing digital pictures in a living room. · Preset Gaming Mode: is suitable for playing video games in a bright living room. 2 1 3 ENTER C T C SIZE T 2. Selecting the aspect ratio The "aspect ratio" is the ratio of the image width to the image height. Digital TV is usually in 16:9 ratio, which is the default for this projector, and most analog TV signals and DVDs are in 4:3 ratio. With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input source. Images can be stretched in a linear manner so the whole of the image is stretched equally, or non-linearly, which distorts the image. Using the projector You can change the projected image ratio (no matter what aspect the source is) by using the Aspect buttons on the remote control or in the Display > Aspect Ratio OSD menu. Select an aspect ratio to suit the format of the video signal and your display requirements. There are five aspect ratios available: The pictures below are presented on the assumption that the original input source is with 4:3 aspect ratio. The black portions are inactive areas and the white portions are active areas. English 1. Anamorphic: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. Letter Box: Enlarges an image with letterbox format to display it in full-screen format with a 16:9 aspect ratio. Wide: A 4:3 aspect ratio image is enlarged NON-linearly in horizontal direction to accommodate 16:9 full-screen display. This stretches only the right and left sides of the image; the central part is unchanged. 5. Real: One-to-one mapping is performed on the input signal without any scaling with the image displayed at the center of the screen. The Anamorphic setting stretches and resizes linearly, except that it treats the vertical and horizontal dimensions independently. It stretches the height of the source image until it reaches the full projected height, and stretches the width of the source image until it reaches the full projected width. This may alter the projected aspect, depending upon the original aspect of the source image. Anamorphic is most suitable for images which are already in a 16:9 aspect, like high definition TV, as it displays them without aspect alteration. The 4:3 setting is most suitable for 4:3 images like standard definition TV and 4:3 aspect DVD movies, as it displays them without aspect alteration. The Letter Box setting resizes an image proportionately both vertically and horizontally to the width of a 16:9 aspect and centers it onscreen. [. . . ] If there is anything wrong, turn the projector off and contact your dealer. English When the projector is in a normal state, . . . POWER Orange Flashing orange Green Off Flashing green Off TEMP LAMP STATE Standby mode. (1) The projector needs 110 seconds to cool down as it was abnormally shut down without the normal cooling down process. Or (2) The projector needs to cool for 110 seconds after the power is turned off. REMARK Cannot turn the projector off. Cannot turn the projector on. When the projector is in an abnormal state, . . . POWER Orange TEMP Off LAMP Red STATE (1) The lamp has exceeded its usage life. · Please contact your dealer for assistance. Orange Red Off The dust filter is seriously clogged Solution: with dust. [. . . ]