User manual BENQ VL3735

[. . . ] Table of Contents Section 1: Quick Start Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Please read these instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select and prepare the installation location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Press (Volume) on the TV, or Volume - on the remote control to decrease volume. The volume indicator will decrease in length as volume falls. Mute setting · Press Mute · Press Mute on the remote control to turn off the audio temporarily. again, or press Volume + or Volume - to restore the sound level. TV sound mode selection Press TV sound/red button on the remote control to select Sound 1, Sound 2, Sound 3, Auto, NICAM, Stereo, or Mono systems (the items available will depend on the TV and video sound system being received). Changing programs Selecting a program directly · To select a single-digit program, press the corresponding program selection button on the remote control. For example, to select program 8, press the program selection button on the remote control. · To select a double-digit program, press the program entry button on the remote control, and then enter the program number using the program selection buttons. For example, to Using the remote control 19 select program 28, press the program entry button, and then the , program selection buttons on the remote control. The program indicator icon on the top right corner of the screen shows either '-' or '--' to indicate which entry mode is selected. English 20 Changing programs sequentially Press P (Program) or P (Program) on the remote control, or (Program) (Program) on the TV to sequentially cycle through your TV programs. or Returning to the previous viewed program To quickly return to the previous viewed program, press Recall on the remote control. This button can be used to toggle between the two most recently viewed programs without having to entering the precise program number. Selecting a picture mode To select a picture mode, press Preset/yellow button to select from the following settings: Picture mode Dynamic Standard Cinema Personal on the remote control. This enables you Description Suitable for viewing in brighter environments. The colour, contrast, and brightness of the image is increased to suit the brighter lighting condition. The colour has been adjusted to more accurately represent natural skin tones. See "Setting up Personal picture mode" on page 32. Using the freeze function Press Freeze /Teletext freeze / on the remote control to freeze the image on the screen. Press it again to restore normal viewing. This freeze function does not control the input source which will continue normally, but not be displayed whilst the image remains frozen. When the image freeze is stopped, normal play will resume in real time. That is, the displayed image will jump to the current time and any interim video is not displayed. Do not leave the screen displaying a static image for an extended period of time (days) because you may temporarily or permanently damage the screen resulting in image traces which could remain visible long after the original image has been removed. Using the sleep timer 1. Press Sleep/blue button on the remote control to activate the sleep timer function. At the expiration of this time, the TV will be turned off automatically. This is useful if you want the TV to automatically turn itself off after a set period of time. Display information Press Information on the remote control to display the input signal information. The information displayed varies according to the input source being selected. Using the remote control Using the PIP (Picture-In-Picture) function If the TV is connected to a TV/CATV, Video and Graphic source simultaneously, pressing PIP on the remote control allows you to display both images on the screen at the same time in PIP (Picture-In-Picture) mode. English Full screen PIP mode Full screen · Video image sources: TV (ATV), Composite Video (AV1, AV2, AV3 or AV4), S-Video (AV3-S or AV4-S). · Graphic image source: PC. To display images in PIP mode: 1. [. . . ] If the antenna is exterior, have a suitable qualified and experienced antenna specialist adjust the antenna. · Check whether all the picture adjustments have been properly performed. · Press Preset/yellow button on the remote control to select a different picture mode. Try selecting a different aspect ratio by pressing Aspect/ teletext size / on the remote control. [. . . ]