User manual BENQ MP620
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BENQ MP620. We hope that this BENQ MP620 user guide will be useful to you.
You may also download the following manuals related to this product:
BENQ MP620 (1491 ko)
BENQ MP620 (3253 ko)
Manual abstract: user guide BENQ MP620
Detailed instructions for use are in the User's Guide.
[. . . ] MP610 / MP720 / MP770 Ceiling Mounting Guide
Welcome
Copyright
Copyright 2005 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.
Safety Instructions
1. [. . . ] It is recommended that you contact your dealer to install the projector for you. Once the projector is installed, safety checks should be conducted on a regular basis.
Table of Contents
Packing Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Projector Installation and Throw Distance Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing a Projector with The Ceiling Bracket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Adjusting the Ceiling Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Specifications and Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 Copyright
Packing Parts List
CEILING ADAPTER PIPE PROJECTOR ADAPTER WASHER x 1 U-PLATE PIPE-BASE V ADJUST BOLT M4 SCREW x 10 TUBE H ADJUST ADAPTER NUT x 7 BOLT x 6 (TUBE BOLT x 2, L ADJUST BOLT x 2, PIPE BOLT x 2)
Names of Parts
U - PLATE CEILING ADAPTER
M4 SCREW x 2 TUBE
Nut
TUBE BOLT x 2
L-ADJUST BOLT x 2
PIPE
PIPE BOLT x 2
M4 SCREW x 4
H - ADJUST ADAPTER V ADJUST BOLT
PIPE BASE
M4 SCREW x 3
PROJECTOR ADAPTER
Packing Parts List 3
Projector Installation and Throw Distance Chart
Floor Installation for a 4:3 screen
Maximum zoom
Minimum zoom Screen Center of lens
Vertical Offset
Projection distance
Feet
Inches
mm
Distance from Screen in mm Min length Average Max length (with max. zoom) zoom)
1745 2148 2182 2618 2863 3055 3491 3579 3927 4295 4364 5011 5236 5727 6545 7158 7855 8590 10909 1876 2199 2345 2815 3078 3284 3753 3848 4222 4617 4691 5387 5629 6157 7036 7695 8444 9234 11727 2007 2250 2509 3011 3293 3513 4015 4116 4516 4939 5018 5763 6022 6586 7527 8232 9033 9878 12545
Vertical Offset in mm
4 5 6 7 8 9 10 12 15 18 25
48 60 72 84 96 108 120 144 180 216 300
1219 1500 1524 1829 2000 2134 2438 2500 2743 3000 3048 3500 3658 4000 4572 5000 5436 6000 7620
18 23 23 27 30 32 36 38 41 45 46 53 55 60 69 75 82 90 114
The recommended focus range is from 1500-8000 millimeters (1. 5-8 meters). There is 3%-5% tolerance among these numbers due to optical component variations.
4 Projector Installation and Throw Distance Chart
Installing a Projector with The Ceiling Bracket
Overview
Diagram of completed installation Ceiling Mount Device
Installation Procedure Insert the U-PLATE into the CEILING ADAPTER, and tighten two M4 screws (from the bottom) into the STEP A screw holes. Then attach the top part to the ceiling.
U-PLATE
CEILING ADAPTER
M4 screws
Ceiling mount screws (not included)
Installing a Projector with the Ceiling Bracket
5
STEP B
Install the TUBE and the U-PLATE with 2 sets of bolts & nuts (TUBE BOLT).
NUTS x 2 TUBE BOLTS x 2
TUBE
STEP C
Install the PIPE and the TUBE with 2 sets of bolts & nuts (L-ADJUST BOLT).
NUTS x 2 L-ADJUST BOLTS x2 PIPE
STEP D
Install the base-assembly.
STEP D1 Attach the PIPE-BASE to the H-ADJUST ADAPTER with 2 M4 screws.
M4 screw
STEP D2 Assemble the PROJECTOR ADAPTER and the projector with 3 M4 screws.
M4 screw PROJECTOR ADAPTER
H-ADJUST ADAPTER
PIPE-BASE
6 Installing a Projector with the Ceiling Bracket
STEP E
Combine the H-ADJUST ADAPTER (including the PIPE-BASE) and the PROJECTOR ADAPTER with one V-ADJUST BOLT set (bolt, washer and nut). Then tighten the M4 screws on both sides.
NUT
WASHER H-ADJUST ADAPTER
M4 screw V-ADJUST BOLT
STEP F
Assemble BASE-ASSEMBLY and the ceiling mount device with 2 sets of bolts and nuts (PIPE BOLT sets). *Two people are required for the completion of this step.
Ceiling mount bracket
NUT BASE-ASSEMBLY PIPE BOLT
Installation finished.
Installing a Projector with the Ceiling Bracket
7
Adjusting the Ceiling Bracket
Height Adjustment
1. The height can be adjusted to 218mm or any value in a range between 548mm and 758mm in increments of 30 mm. Insert the L-ADJUST BOLT back into the PIPE, and then re-attach the nuts previously removed.
5.
Maximum Height
Minimum Height
8
Adjusting the Ceiling Bracket
218
Horizontal Angle Adjustment
1. [. . . ] Re-tighten the 2 sets of screws connecting the H-ADJUST ADAPTER and the PROJECTOR ADAPTER. The tilt angle can be adjusted in a range between +5 and -15 degrees.
5
Adjusting the Ceiling Bracket 9
Specifications and Diagrams
Specifications
Adjustment Range Height Horizontal angle Vertical angle Weight Loading 218mm, 548mm, 578mm, 608mm, 638mm, 668mm, 698mm, 728mm and 758mm. 30 to +30 degrees +5 to -15 degrees 3. 2 kg 3. 5 kg
Diagrams
Left View Front view Right view
10 Specifications and Diagrams [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BENQ MP620
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BENQ MP620 will begin.