User manual BENQ CD 650P

[. . . ] Audio Play/Skip track control button plays and skips one information track of an audio CD. Busy indicator lights up while data is being read from the disc; flashes during seek operation. [. . . ] The CD-ROM drive can be configured as a master drive if the jumper is installed on "MA". Audio line out connector has two channels, left and right audio outputs. Digital Audio Output offers high quality audio effect by outputting digital signal to D/A converter. Testing jumper is reserved for manufacturer internal testing purposes. 4. 5. 6. 2 User's Guide Installation Hardware Installation Please follow these steps to install this CD-ROM drive: 1. Turn off the computer and all peripheral devices, and disconnect the computer's power cord. Secure the drive into the half-height drive bay using four screws. 2. The colored edge of the IDE cable must be aligned with the Pin 1 position. 7. Software Installation For Windows 95 or OS/2 Warp, no external device driver is needed. For DOS and Windows 3. 1, the procedure for installation is as follows: User's Guide 3 1. [. . . ] A straightened paper clip with a diameter of 1. 2 mm (typical) can be used as an eject-bar. Make sure to turn off the power before manual disc eject operation. 4 User's Guide [. . . ]