User manual BENCH KH 2024

[. . . ] A suitable universal DC adapter (6. 0-7. 5V) intended for use on different equipment can be obtained from most electrical suppliers. 21 6 Warning: Even when using an external adapter, you should always have four UM3 batteries in the battery compartment as a back-up in case of mains power failure. Operation · When the device is switched on for the first time, the date and time are set as 1 January 2001, 0:00 hours. · The two alarm presets are both set to 0:00 hours, daily wake-up, but are switched off. · Followed by a change to automatic operation. 2. 1 Automatic operation (Brief description) · By pressing the »MODE« button you can call up the various operating modes one after the other (with the radio switched on or off): Setting the time ­ date ­ city for local / world time · With the radio switched off you can also select date and world time clock displays as alternatives to the local 7 time. [. . . ] Keep the »UP« button pressed to change the time quickly in 10 minute increments. · Press »DOWN« to decrease the time setting by 1 minute. Keep the »DOWN« button pressed to change the time quickly in 10 minute decrements. · If within 15 seconds there has been no further setting made, then the current settings are activated/stored and the device goes once more into automatic operation. 8 2. 4 Setting the local time · Press »MODE« three times if the device is in time display mode. · Press »MODE« four times if the device is in radio mode. · If the device is already in "Date entry" mode as described in Section 2. 3, you can enter "Setting the local time" mode by pressing the »MODE« button once. · The hours, minutes and the day of the week displays are not displayed here and the display is empty. · By pressing »UP« or »DOWN« you can select the time zone you require from the different codes. : Code Time difference to CET LON 0:00 MUN + 1:00 CAI + 2:00 MOW + 3:00 DXB + 4:00 KHI + 5:00 City London München Kairo Moskau Dubai Karachi DAC BKK HKG TYO SYD NOU WLG --HNL ANC LAX DEN CHI NYC CCS RIO -1H -2H + 6:00 + 7:00 + 8:00 + 9:00 +10:00 +11:00 +12:00 ­11:00 ­10:00 ­ 9:00 ­ 8:00 ­ 7:00 ­ 6:00 ­ 5:00 ­ 4:00 ­ 3:00 ­ 2:00 ­ 1:00 Dhaka Bangkok Hong Kong Tokyo Sydney Nouméa Wellington --Honolulu Anchorage Los Angeles Denver Chicago New York City Caracas Rio de Janeiro ----- · The 'SUN' (sun symbol) display shows the remaining daylight. · If within 15 seconds there has been no further setting 9 made, then the current settings are activated and the device goes back into automatic operation. is made within 15 seconds, the device shows the frequency if the radio is on, or if not, the time again. 2. 5 Checking the world time · Press »MODE« four times if the device is in time display mode. · Press »MODE« five times if the device is in radio mode. · If the device is already in "Setting the local time" mode as described in Section 2. 4, you can enter "Checking the world time" mode by pressing the »MODE« button once. · The last time zone is displayed steadily in the hours and minutes part of the display, while on the right the code for the appropriate city starts to flash. · You can select the required time zone by pressing the »UP« or »DOWN« buttons in accordance with the table in Section 2. 4. · If »MODE« is pressed once, or if no further setting 2. 6 Sleep Timer · Press »SLEEP/RADIO ON« once to check the sleep timer current setting. If the Sleep Timer is not activated, then the display briefly shows "ON" (radio switched on). · Press »SLEEP/RADIO ON« once again to change the current setting. The radio remains switched on and the selected band appears in the lower area of the LCD. · Press »SLEEP/RADIO ON« when the display reaches desired number of minutes/duration for the Sleep Timer (e. g. · If within 15 seconds there has been no further setting made, then the current settings for the Sleep Timer are activated and the device goes back into automatic operation. 2. 7 Setting ALARM 1 and ALARM 2 · Press the »AL. 'AL 1' or 'AL 2' is displayed steadily in the alphanumeric 10 LCD display. · The current setting HH. MM (hours:minutes) and the day of the week display start to flash. [. . . ] · When the 'MEMORY' display is flashing you can use »UP«, »DOWN« or »MEM. The 'MEMORY' display is no longer shown. 2. 11 Station search manual /search process · If the radio is on, press »UP« to increase the reception frequency manually (for step sizes, see frequency steps column in the table). · Press »DOWN« in order to change the reception frequency downwards (by a step at a time). · Keep pressing on to »UP« or »DOWN« button for an automatic search (search process) for the nearest receivable radio station. 2. 10 Storing radio stations · Press »MEMORY« once to save the frequency of the radio station currently being received. [. . . ]