User manual BELSON MH2016

[. . . ] 12) Learn to get to know the parts which make up your dishwasher, you will use it better for it. This is where you will find the description of the controls and the internal parts. 13) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. 14) After loading the dishes, you need to select the right wash cycle and measure out the correct dose of detergent and rinse aid. [. . . ] 14 ARISTON DISHWASHER - Instructions for installation and use Only use specific dishwasher detergents. The detergent should be poured into the two containers C and D up to the rim. If you prefer to use the detergent in tablet form, then place one inside the container “D” and close the lid. Detergent and rinse aid B D C D ISHWASHER Useful tips • Use the right amount of detergent: if you use too much, you will not get cleaner dishes, but just more environmental pollution. Check whether there is any detergent residue on the edges of the dispenser. • Keep your dishwasher detergent and rinse aid in a cool, dry place and away from children. The rinse aid container is situated on the inside of the appliance door; you should refill it when the indicator light “T” flashes ). You can adapt the amount of rinse aid used by the dishwasher: regulate the adjuster F which you will find under lid C. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting. Warning Three-in-one dishwasher tablets are now available on the market, and combine the detergent, salt and rinse aid all in one. S For particularly delicate dishes, we recommend you use the specific wash cycle offered by your dishwasher. ARISTON DISHWASHER - Instructions for installation and use 17 D ISHWASHER Installation After having bought or moved your dishwasher to another home, a correct installation ensures that your dishwasher will operate smoothly and efficiently. If this your dishwasher, you can even precaution is not taken, the water place it so that its sides or back inlet could get blocked, causing panel are side by side with furniture damage to your dishwasher. The dishwasher is provided with water supply and drain hoses, which can be directed towards the left or right to facilitate appropriate installation. A This dishwasher model can be built under a single worktop (please read the relevant instruction sheet). Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Connect the cold water supply hose to a 3/4 gas threaded connection, insert the small filter supplied with the dishwasher and taking care to screw it tightly onto the tap (see figure 2). If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before Fig. 2 Your dishwasher has arrived and moving Hot water connection. Your dishwasher can be supplied with hot water from the mains supply (if you have a central heating system with radiators) at a temperature of no more than 60°C. [. . . ] Cleaning and special maintenance Reassemble the filter parts (as shown in the figure) and reinsert the whole assembly into the dishwasher. Improper replacement of the filters may reduce the efficiency of the wash and even damage your dishwasher. Care and maintenance Once in a while, once a month, spend a little time on the filter assembly and the sprayer arms. Cleaning the Water Inlet Filter Periodically clean the water inlet filter (see figure 2 under "Installation") located on the outlet of the water supply tap. [. . . ]