User manual BELKIN WIN2KF5U004

[. . . ] Installation for the F5U004 in Windows 2000 If you Downloaded the Software off the website, it's a compressed file and needs to be unzipped before running this setup. Check Specify a Location and uncheck everything else and click next. 4. [. . . ] To do this, first go to My Network Places Properties by Right clicking on the My Network Place Icon on your desktop. If you have many there to choose from, It should be the one with number next to it. When you determine which one is yours Right click on it and go to Properties. 21. Make sure that under connect using, it says "Belkin Direct Connect Network Adapter". If it does not, then that means you did not select the correct one under my network places Properties in step 19 and 20. Now need to make sure the all the boxes in the list below check marks in them. Then Double left click on "Internet Protocol (TCP/IP)" 24. If it is then select Use the following IP address and in the Box below it type your IP address. The first three sections of the address should be the same but the last section must be different between. (For Example Computer 1 is 192. 168. 100. 1 and Computer 2 is 192. 168. 100. 2) 25. [. . . ] Now you will need to repeat these steps on the Other PC's. Note: These instruction are written for the software off our website. If any other the installation does not correctly, it is recommend that you download the current drivers. [. . . ]