User manual BELKIN USB 2.0 AND FIREWIRE 6-PORT PCI CARD

[. . . ] After installing the PCI Card, replace the outer cover and turn on the computer. Note: Depending on the speed of your computer, it may take up to 30 seconds for the PCI Card to be detected. You will now be prompted to insert the Windows 98 SE installation CD into your CD-ROM drive. Note: The directory being displayed on the screen requesting your Windows 98 SE installation CD may not be correct. [. . . ] When Windows restarts, the PCI Card will be detected and install drivers for two "Ali PCI to USB Open Host Controller", one "Standard Enhanced PCI to USB Host Controller", one "USB 2. 0 Root Hub" , two "Root Hub" entries , and one "OHCI Compliant IEEE 1394 Host Controller". Note: Depending on the speed of your computer, it may take up to 45 seconds for the PCI Card to be detected. Click the plus sign (+) next to "Universal Serial Bus Controller". The "Universal Serial Bus Controllers" list will now include two "ALi PCI to USB Open Host Controller" entries, one "Standard Enhanced PCI to USB Host Controller", one entry for "USB 2. Note: If your computer features built-in USB ports, or if you have other USB PCI controllers installed, you will see additional root hub entries. the "IEEE 1394 Bus Controller" list will now include one "OHCI Compliant IEEE 1394 Host Controller" entry. Note: If your computer features built-in IEEE 1394 ports, or if you have other IEEE 1394 PCI host controller cards installed, you will see additional IEEE 1394 host controller entries. If Windows 2000 with Service Pack 3 or below is installed on your computer, follow the instructions below. After a few moments, the main menu will automatically start and display each of the available installation options. Open the Start menu in the lower, left-hand corner of your Windows display, then select "Shut Down" and click "OK". Once the computer has completely shut down, remove the computer's cover and locate an empty PCI slot. Remove the port cover that corresponds with the PCI slot you wish to use. After installing the PCI Card, replace the outer cover and turn on the computer. After the install is complete, you may be prompted to click "Finish" and to restart your computer. Note: Depending on the speed of your computer, it may take up to 30 seconds for the PCI Card to be detected. After installation is complete, check the Windows Device Manager to confirm that all components of the PCI Card have been properly installed. Note: You will notice that there are two "Universal Serial Bus Controller" entries listed. Click the plus sign (+) next to the first "Universal Serial Bus Controller". Click the plus sign (+) next to the next "Universal Serial Bus Controller". The "Universal Serial Bus Controller" list will now include two "ALi to USB Open Host Controller" entries, and two "USB Root Hub" entries. Note: If your computer features built-in USB ports, or if you have other USB PCI controllers installed, you will see additional root hub entries. [. . . ] It lets you easily create personalized screen savers, print panoramas on single or multiple pages, copy panoramas to presentations and office documents, and more. , of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. , declare under our sole responsibility that the F5U508, to which this declaration relates, is in conformity with Generic Emissions Standard EN 55022:1998 Class B, EN50081-1 and with Generic Immunity Standard EN50082-1 1992. Warrants this product against defects in materials and workmanship for its lifetime. [. . . ]