User manual BELKIN P73890-F5U222

[. . . ] Your current USB devices will continue to work as they always have, and in some cases even better. Follow the simple installation instructions in this manual to get your CardBus Card up and running, then enjoy the speed and convenience of USB. 1 Features · Three USB host adapters integrated into a single CardBus Card, one USB 2. 0 EHCI host controller providing 480Mbps of USB bandwidth, and two USB 1. 1 OHCI host controllers providing 12Mbps of USB bandwidth each · Two downstream high-speed USB ports · Simultaneous connection capability of low-, full-, and high-speed devices · Auto-detection of new devices as they are connected, as well as the speed of each new device · Backward-compatibility with USB 1. 1 devices · Full compliance with USB specifications · Plug-and-Play technology · A Belkin Lifetime Warranty 2 Specifications · Open Host Controller Interface- (OHCI-) compliant (USB 1. 1 Host Controller) · Enhanced Host Controller Interface- (EHCI-) compliant (USB 2. 0 Host Controller) · PCI revision 2. 1-compliant · Current: 500mA per port · USB revision 2. 0-compliant · 3. 5mm DC power jack · Power Supply Input 100-120 VAC Output 5 VDC 2. 4 A · Power Supply Polarity Package Contents · · · · Belkin USB 2. 0 Hi-Speed CardBus Card Optional 5-volt, 2. 4-Amp power supply User Manual Driver Installation CD-ROM 3 System Requirements · PC-compatible laptop computer with available 32-bit Type II CardBus slot · Windows® 98 SE, 2000, Me, or XP operating system Operating System Compatibility Operating System Windows Windows Windows Windows 98 SE 2000 Me XP USB 1. x Support Yes Yes Yes Yes USB 2. 0 Support Yes Yes Yes Yes 4 Installation Please refer to the section that corresponds to your Windows operating system (OS). Installation Procedure for Windows 98 SE OS This procedure will install two USB 1. 1 host controllers and one USB 2. 0 enhanced host controller. (1) Plug the provided power supply into an AC wall outlet or surge protector, then insert the DC power connector into the power jack on the CardBus Card. (5) Insert the Belkin USB 2. 0 driver installation CD into your computer's CD-ROM drive. [. . . ] (3) Click on the plus sign (+) next to "Universal Serial Bus Controllers". The "Device Manager" list will now include two "NEC USB Open Host Controller" entries, one "Belkin USB 2. 0 Hi-Speed Host Controller" entry, and two additional "USB Root Hub" entries. Installation Procedure for Windows 2000 OS This installation procedure will install two USB 1. 1 host controllers and one USB 2. 0 enhanced host controller. (1) Plug the provided power supply into an AC wall outlet or surge protector, then insert the DC power connector into the power jack on the CardBus Card. (5) Insert the Belkin USB 2. 0 driver installation CD into your computer's CD-ROM drive. 7 Installation (continued) (6) After loading, the Windows OS will detect "NEC PCI to USB Open Host Controller". (7) The Windows OS will detect "Universal Serial Bus (USB) Controller". Select "Search for a suitable driver for my device (recommended)" and click "Next". (9) The Windows OS will find "Belkin USB 2. 0 Hi-Speed Host Controller". (10)The Windows OS will now install the enhanced host controller driver. Installation is now complete. Verifying Proper Installation (Windows 2000 OS) After installation, check the "Windows Device Manager" to verify that your CardBus Card has been properly installed. (3) Select the "Hardware" tab and click on the "Device Manager" button. (4) Click the plus sign (+) next to "Universal Serial Bus Controllers". 8 Installation (continued) The "Device Manager" list will now include two "NEC USB Open Host Controller" entries, one "Belkin USB 2. 0 Hi-Speed Host Controller" entry, and two additional "USB Root Hub" entries. Installation Procedure for Windows Me OS This installation procedure will install two USB 1. 1 host controllers and one USB 2. 0 enhanced host controller. (1) Plug the provided power supply into an AC wall outlet or surge protector, then insert the DC power connector into the power jack on the CardBus Card. (5) Insert the Belkin USB 2. 0 driver installation CD into your computer's CD-ROM drive. (6) After loading, the Windows OS will detect "NEC USB Open Host Controller (E13+)". (8) Select "Automatic search for a better driver (recommended)". Click "Next". 9 Installation (continued) (10)The Windows OS will locate the driver for "Belkin USB 2. 0 Hi-Speed Host Controller". (11)The Windows OS will now install the USB 2. 0 enhanced host controller driver. (12)The Windows OS will detect "NEC USB Open Host Controller (E13+)". (13)After installation of the USB host controllers, the Windows OS will detect "USB Root Hub" and automatically install the required driver support. Installation is now complete. Verifying Proper Installation (Windows Me OS) After installation, check the "Windows Device Manager" to verify that the CardBus Card has been properly installed. [. . . ] The "Device Manager" list will now include two "NEC USB Open Host Controller" entries, one "Belkin USB 2. 0 Hi-Speed Host Controller" entry, and two additional "USB Root Hub" entries. Safe Removal of the CardBus Card from your Laptop Before ejecting the CardBus Card from your laptop's CardBus slot, you must use the PC card utility provided by your laptop manufacturer to disable the CardBus Card. Failure to follow this step may cause your operating system to freeze, requiring a system restart. An icon representing the PC card utility program will normally be found in the system tray found in the lower right-hand corner of the Windows display, or in the Windows Control Panel. 12 Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: F5U222 to which this declaration relates: Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Declaration of Conformity We, Belkin Components, declare under our sole responsibility that the F5U222, to which this declaration relates, is in conformity with Generic Emissions Standard EN55022, EN55024, and EN61000-3-2, EN61000-3-3 with Generic Immunity Standard. ICES Statement This Class B digital apparatus complies with Canadian ICES-003. [. . . ]