User manual BELKIN F5U208WINXPINSTALLATION

[. . . ] F5U208 Windows XP Installation Page 1 of 2 F5U208 Windows XP Installation 1. After unzipping the files onto your hard drive, the path you will have to specify during installation will be C:\F5U208. [. . . ] You will see a warning stating that the Belkin USB VideoBus II, Audio has not passed Windows Logo testing, Continue Anyway. In order to check the installation, go to Start, and right click on My Computer and left click on properties. Click on the Hardware tab and then click on the Device Manager button. This would be the video capture option that you would choose in your application. This would be the sound capture option that you would choose in your application. If you do not see either of these or if there is an unknown or USB device with a question or exclamation mark, proceed to the un-installation instructions. Uninstall Instructions (The adapter must be plugged in. ) Look for any Question or Exclamation marks in front of any of the selections, if you see one in front of Belkin or unknown USB devices, remove these selections by right clicking on them and choose Uninstall, otherwise continue to next step. Leave the adapter plugged into the computer and go to Start, and right click on My Computer and left click on Properties. Click on the Hardware Tab and then click on the Device Manager button. Under this heading you should see a Belkin USB 10/24/2001 F5U208 Windows XP Un-Installation (continued) Page 2 of 2 VideoBus II, Video. Right click on the Belkin USB VideoBus II, Video and choose Uninstall. [. . . ] If oem6 was the highest number, double click on the oem6 and scroll to the bottom and locate any information about Belkin or Etek. If you find this information, close the file and delete this oem and the oem. pnf with the same number. [. . . ]