User manual BELKIN F5U208-MAC

[. . . ] Follow the directions on VideoBus II Connection in the next section. Package Contents: · Belkin USB VideoBusTM II for Macintosh® · Installation CD Including StataTM VideoShop 4. 5 · Instruction Manual 2 3 VideoBusTM II Connection Connecting the VideoBus II between your computer and video device is very simple. If not already connected, connect the VideoBus II USB connector to an open port on your computer or USB Hub. Connect the RCA A/V patch cords (not supplied) to your video device (e. g. NOTE: If you have a video device that used S-Video, connect the S-Video cable instead of the RCA video cable. [. . . ] Select "Show Digitizing Window" from the "Windows" menu. Click the "Digitize" button on the button bar (icon that looks like a video camcorder located on the upper right-hand corner of your screen). The size of the digitizing area is displayed at the top left: 160x120. From the "Digitize" menu, select "Video On" to enable the video digitizing function. Digitizing Clips using StrataTM VideoShop 4. 5 on the USB VideoBusTM (continued) the Video input to be digitized. The options in the dialog box will change to "Source Options". Select your "Input": either "S-Video" or "C-Video" depending on the type of your connection. NTSC is the standard in the United States and Japan; PAL is used in Europe, and SECAM is used in France. Again, from the "Digitize" menu, select "Sound On" to enable the Audio digitizing function. From the "Digitizing" menu, select "Sound Settings". From the "Sound Settings" pop-up menu select "Source". This option is used to select the source for the audio input to be digitized. The options in the left half of the "Sound" dialogue change to "Source" options. This will allow you to hear the audio through your computer's speaker while you are recording. Note: This command is only enabled if VideoShop detects a digitizing card in your computer (in our case it is the USB VideoBus). From the "Video Settings" pop-up menu (top left) select "Source". This option is used to select the source for 8 To Test Your Connections: 1. Observe the video appears in the preview area of the "Digitizing Window". 9 Digitizing Clips using StrataTM VideoShop 4. 5 on the USB VideoBusTM (continued) To Adjust the Digitized Video Image: 1. Click the "Image" button in the "Digitize Window". Select the "Sound Settings" command from the "Digitizing" menu. Adjust the "Gain Control" slider until the audio signal peaks slightly into the red on the "Level" meter. Press the "Record" button in the "Digitize Window" using your mouse. [. . . ] For further information about digitizing clips and using digitized clips in a movie, open "Tutorial" on the USB VideoBus CD. Go to Chapter 9, "Digitizing Clips and Printing to Videotape". It is recommended that you read the contents of the "Tutorial" file starting from the beginning (Chapter 1), so you will be familiar with all the terminology. 3. 4. Note: 5. Information FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Components, of 501 West Walnut Street, Compton CA 90220, declare under our sole responsibility that the product: F5U208-MAC to which this declaration relates: Complies with Part 15 of the FCC Rules. [. . . ]