User manual BELKIN F5U206-MAC

[. . . ] Connect the Yellow RCA or S-video connector on one end of the audio/video cable to the "Video Out" connector on the VCR. Connect the Yellow RCA or S-Video connector on the other end of the Audio/Video cable to the appropriate connector on the USB VideoBusTM. If you want to capture sound as well, connect the Red and White RCA connectors on the included VideoBusTM audio cable to the left and right "Audio Out" connectors of the VCR. Connect the mini-stereo plug on the VideoBusTM audio cable to the microphone jack on the iMacTM, G3 or G4. 2. [. . . ] You can open the digitizing window at anytime 7 Note: P73261/F5U206-MAC/US/man. qxd 1/7/00 5:23 PM Page 8 Digitizing Clips using StrataTM VideoShopTM 4. 5 on the USB VideoBusTM (continued) with the "Show Digitizing Window" command. The digitized clips will be stored in the VideoShopTM cache folder (or designated digitizing folder). Both the "Recording" and "Project Settings" change to "Width: 160", "Height: 120" and "FPS: 15". This means that the clip you digitize will be 160 pixels wide x 120 pixels high. Your VideoShopTM project will also have the same settings and have a frame rate of 15 frames per second. Select "Show Digitizing Window" from the "Windows" menu. -ORClick the "Digitize" button on the button bar (icon that looks like a video camcorder located on the upper righthand corner of your screen). The size of the digitizing area is displayed at the top left: 160x120. From the "Digitize" menu, select "Video On" to enable the Video digitizing function. 3. 4. This command is only enabled if VideoShopTM detects a digitizing card in your computer (in our case it is the USB VideoBusTM). From the "Video Settings" pop-up menu (top left) select "Source". This option is used to select the source for 8 Note: P73261/F5U206-MAC/US/man. qxd 1/7/00 5:23 PM Page 9 Digitizing Clips using StrataTM VideoShopTM 4. 5 on the USB VideoBusTM (continued) the Video input to be digitized. The options in the dialog box will change to "Source options". Select your "Input": either "S-Video" or "C-Video" depending on the type of your connection. NTSC is the standard in the United States and Japan, PAL is used in Europe and SECAM is used in France. Again, from the "Digitize" menu, select "Sound On" to enable the Audio digitizing function. From the "Digitizing" menu, select "Sound Settings". From the "Sound Settings" pop-up menu select "Source". This option is used to select the source for the Audio input to be digitized. The options in the left half of the "Sound" dialogue change to "Source" options. This will allow you to hear the audio through your computer's speaker while you are recording. Observe the video appears in the preview area of the "Digitizing Window". [. . . ] This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. [. . . ]