User manual BELKIN F5U116WINXPINSTALLATION

[. . . ] F5U116 Windows XP Installation Page 1 of 2 F5U116 Windows XP Installation 1. After unzipping the files onto your hard drive, the path you will have to specify during installation will be C:\F5U116. [. . . ] You will see a warning stating that the Belkin F5U116 USB to Serial Port has not passed Windows Logo testing, Continue Anyway. In order to check the installation and the COM port number for this adapter, go to Start, and right click on My Computer and left click on properties. Click on the Hardware tab and then click on the Device Manager button. Under this heading you should see a Belkin F5U116 USB Serial port with a number. If you do not see the COM port or if there is an unknown or USB device with a question or exclamation mark, proceed to the un-installation instructions. Uninstall Instructions (The adapter must be plugged in. ) Look for any Question or Exclamation marks in front of any of the selections, if you see one in front of Belkin or unknown USB devices, remove these selections by right clicking on them and choose Uninstall, otherwise continue to next step. Leave the adapter plugged into the computer and go to Start, and right click on My Computer and left click on Properties. Click on the Hardware Tab and then click on the Device Manager button. Under this heading you should see a Belkin F5U116 USB Serial port with a number. Right click on the Belkin F5U116 USB Serial port and choose Uninstall. Click on the plus sign next to Universal Serial Bus Controllers and locate Belkin F5U116 USB-232 Adapter. [. . . ] If oem6 was the highest number, double click on the oem6 and scroll to the bottom and locate any information about Belkin or Etek. If you find this information, close the file and delete this oem and the oem. pnf with the same number. [. . . ]