User manual BELKIN F5U109WINXPINSTALLATION

[. . . ] F5U109 Windows XP Installation Page 1 of 2 F5U109 Windows XP Installation If the adapter was partially installed or was plugged in before this installation, Please follow the uninstall instructions first or the installation will not work. 1. After setup is run, Windows will give you a warning stating that this software has not passed Windows logo testing, Continue Anyway. [. . . ] Click on the Hardware tab and then click on the Device Manager button. Under this heading you should see a Belkin USB Serial port with a number. If you do not see the COM port or if there is an unknown or USB device with a question or exclamation mark, proceed to the un-installation instructions. Uninstall Instructions (The adapter must be plugged in. ) Look for any Question or Exclamation marks in front of any of the selections, if you see one in front of Belkin or unknown USB devices, remove these selections by right clicking on them and choose Uninstall, otherwise continue to next step. Leave the adapter plugged into the computer and go to Start, and right click on My Computer and left click on Properties. Click on the Hardware Tab and then click on the Device Manager button. Under this heading you should see a Belkin USB Serial port with a number. 12. Page 2 of 2 Right click on the Belkin USB Serial port and choose Uninstall. Click on the plus sign next to Universal Serial Bus Controllers and locate Belkin USB-232 Adapter. Close Device Manager and System Properties and Unplug the adapter from the computer. Go to Start, Control Panel and double click on Add or Remove Programs. [. . . ] If oem6 was the highest number, double click on the oem6 and scroll to the bottom and locate any information about Belkin or Etek. If you find this information, close the file and delete this oem and the oem. pnf with the same number. [. . . ]