User manual BELKIN F5U005

[. . . ] USB BusPort Features Connect 2 USB devices instantly Supports full 12 Mbps and 1. 5 Mbps low speed devices Automatically detects speeds and connections of devices Full compliance with USB Specifications Plug-and-Play Installing the Software Drivers When you initially connect your USB Port, Windows" will automatically detect you have a new device and request the Windows" 98 CD. Following are step by step instructions on how to install the software drivers. [. . . ] This will be in the area of your computer where other cards that look similar to the USB BusPort- are installed. Confirm that the USB BusPort- will fit into the available slot you have chosen. Remove the knockout on the back of the PC which corresponds to the PCI slot you have confirmed as your selection. If there is a screw, place in a safe spot as you will be using it to attach the USB BusPort-. Apply pressure as needed until the edge connector is completely sealed. Once the BusPort- is fully sealed, the gold edge connectors are completely in the slot. Now mount the BusPort- with the screw that you previously placed in a safe place. Now that the BusPort- is installed you can now replace the power cable. Proceed to the next section, Installing Software Drivers. This equipment has been tested and found to comply with the limits for a Class A & B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] · Consult dealer or technical support for help. Belkin Components Corporate Headquarters - 501 West Walnut Street- Compton - CA 90220 Phone 310. 898 1100 - 800. 223. 5546 - Fax 310. 898. 1111 www. belkin. com (ID 1998 Belkin Components. All Trade Names Are Registered Trademarks Of Respective Manufacture users Listed. [. . . ]